A bucking bar is used to form the shop head of a rivet. It is held against the shank of a rivet and as the rivet gun bangs on the factory head the bar 'bucks' against the shop head causing the metal to deform. That deformation mushrooms the shank forming the shop head. There are many shapes, sizes, and weights of bucking bars. Many are shaped and sized for special-purpose (generally difficult) situations. Pictured is a typical set of bucking bars.

Tungsten Bucking Bar Manufacturer & Supplier: Chinatungsten Online - http://www.buckingbar.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

 

The tungsten bucking bars are designed to significantly reduce vibration and provide greater comfort for the operator. These bars are up to twice as heavy as their ductile iron counterparts. Results have shown that using Tungsten bars is far superior to ductile iron and helps to reduce carpel tunnel syndrome. All edges are burr-free and all surfaces are polished to provide superb riveting results.

Tungsten Bucking Bar Manufacturer & Supplier: Chinatungsten Online - http://www.buckingbar.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn


 

SiC is a ceramic material with an outstanding hardness, only surpassed by diamond, cubic boron nitride and boron carbide. The material is highly wear resistant and chemically inert to all alkalies and acids. It is also highly heat resistant. These properties makes Silicon Carbide an outstanding abrasive and ceramic material to be used under extreme operating conditions.
 
• Density: 3.21 g/cm3
• Vickers hardness: 29 GPa
• Coefficient of Thermal expansion: 5·10-6/K
• Thermal conductivity: 50 to 100 W/m K
• Typical temperature resistance: 1500°C in air, 2400°C in inert atmosphere
• Specific heat: 750 J/kg K

Tungsten Carbide Manufacturer & Supplier: http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. Tungsten alloy swaging rod has been widely used by HQ-9.

The HQ-9  is China’s new generation medium- to long-range, active radar homing air defence missile.

The land-based HQ-9 system has an anti-radiation variant, known as the FT-2000 for export. The export designation for air defense version is FD-2000 (with FD stands for Fang Dun, meaning defensive shield), and its developer China National Precision Machinery Import and Export Corporation (CPMIEC) first made it public at the Africa Aerospace and Defence Exhibition held at Cape Town in March 2009. In September 2013 the HQ-9 submitted by CPMIEC won Turkey's T-LORAMIDS program to co-produce 12 long range air defense systems.

With the high hardness and high density of tungsten alloy swaging rod, HQ-9 has good antiaircraft performance. It can be also used to defense cruise missile.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn




 

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. GBU-10 is taking advantage of high density, high hardness and elongation of tungsten alloy swaging rod.

GBU-10 is based on the Mk 84 based on the Mk 84 general-purpose bomb, but with laser seeker and wings for guidance. Introduced into service c. 1976. Used by USAF, US Navy, US Marine Corps, RAAF and various NATO air forces.

The GBU-10 has been built in more than a half-dozen variants with different wing and fuse combinations. Weight depends on the specific configuration, ranging from 2,055 lb (934 kg) to 2,103 lb (956 kg).

GBU-10 takes advantage of characteristics of tungsten alloy swaging rod to destroy high-value targets.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. CBU-97 used tungsten alloy swaging rod as its kinetic energy penetrator to destroy armor vehicle.

The CBU-97 Sensor Fuzed Weapon is a United States Air Force 450-kilogram (1,000 lb)-class non-guided (freefall) Cluster Bomb Unit (CBU). It was developed and produced by Textron Defense Systems. The CBU-97 in conjunction with the Wind Corrected Munitions Dispenser guidance tail kit, which converts it to a precision-guided weapon, is designated CBU-105.

The CBU-97 consists of an SUU-66/B tactical munition dispenser that contains 10 BLU-108 submunitions. Each submunition contains four hockey-puck-shaped sensor-fused projectiles called Skeets. These detect target vehicles, such as tanks, armored personnel carriers, trucks and other support vehicles, and fire a kinetic energy penetrator downwards at them.

With the high density and hardness of tungsten alloy swaging rod, CBU-97 can penetrate armor easily.


Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn


 

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. CBU-87 used tungsten alloy swaging rod to destroy armor vehicle.

The CBU-87 is a cluster bomb used by the United States Air Force, developed by Aerojet General/Honeywell and introduced in 1986 to replace the earlier cluster bombs used in the Vietnam War. CBU stands for Cluster Bomb Unit. When the CBU-87 is used in conjunction with the Wind Corrected Munitions Dispenser (WCMD) guidance tail kit, it becomes a precision-guided weapon, designated CBU-103.

With the high density and hardness of tungsten alloy swaging rod, CBU-87 can penetrate armor easily.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. GBU-15 used tungsten alloy swaging rod as raw materials of its warhead.

GBU-15 is an unpowered, glide weapon used to destroy high-value enemy targets. It was designed for use with F-15E Strike Eagle, F-111 'Aardvark' and F-4 Phantom II aircraft, but the United States Air Force is currently only deploying it from the F-15E. The GBU-15 has long-range maritime anti-ship capability with the B-52 Stratofortress. Rockwell International is the prime contractor for this weapon system.

GBU-15 takes advantage of density and hardness of tungsten alloy swaging rod to destroy high-value enemy targets.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. GBU-53/B is planning to use tungsten alloy swaging rod as raw materials of its warhead.

The GBU-53/B is an American air-launched, guided bomb. Development was started in 2006 for a 250 pounds (113 kg) class bomb that can identify and strike mobile targets from standoff distances in all weather conditions. It will be integrated on the F-15E and F-35 Joint Strike Fighter. Its first flight was announced on May 1, 2009.

GBU-53/B takes advantage of density and hardness of tungsten alloy swaging rod to destroy underground bunker.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten alloy rod through calcinations. The normal method used in the processing are extruding, forging and sintering. After calcinations, tungsten alloy swaging rod has higher ductility, toughness and tensile strength than tungsten alloy rod, so it can be used for a longer time. Tungsten alloy swaging rod has been widely used for GBU-44/B.

The GBU-44/B is a GPS-aided laser-guided variant of the Northrop Grumman Brilliant Anti-Tank (BAT) munition which originally had a combination acoustic and IR seeker. The system was initially intended for use from UAVs, and it is also planned to integrate the weapon with the Lockheed AC-130 gunship, giving that aircraft a precision stand-off capability. The Viper Strike is now produced by MBDA.

With the high density and hardness of tungsten alloy swaging rod, GBU-44/B can penetrate armor and destry armor vehicle.


Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn