Apart from dart head, dart body, dart shaft and dart wing the four parts of tungsten alloy dart, there’re many other tungsten dart accessories.

Rubber washer: if the metal dart rod is directly locked on the dart, it would be easy to loose, which will affect the competitors’ attention. In order to solve the problem of loose, dart manufacturers have produced rubber washers, which can be attached to the trap on the hook or dart point by a small tool to fix the dart shaft. Then, a kind of quick drying rubber has appeared, which is packed in a small plastic bottle. Squeezing it into the dart head when using it. After 15 minutes, it will condense into a solid form. Its function is the same as the washer and it’s more convenient to use.

 

 

Dart wing fixer: it’s a small part to protect the form of the dart wing. The most common ones are aluminum, which is small and exquisite. Its initial role was to avoid damage to the dart wings when a rear end collision accident happened. It has shown that the dart wing fixer can also substantially extend dart wing’s service life. Besides, it can also make your dart wings fully extended and keep the shape of the dart wings. As its small size, it’s relatively easy to lose, and it’s necessary to pay attention to storage. 

 

 

Grinding dart device: it’s the whetstone that used to grind metal dart tip. Darts would be often dropped on the ground or embedded in the wire ring dart target, so darts tips would inevitably be damaged. You can use the grinding device, and you can also buy some fine abrasive paper, spread it on the table, and then rolling the dart tip back and forth on it. It is important to remind you that the dart tip should not be worn regularly. Some people always afraid that their darts are not sharp enough and not easy to hit on the target. In fact, the sharper the dart is, the easier it is to be struck by the wire ring of the dart target. If your dart tip is sleek, it will slide when it touches the wire. And it will stick a small hole in the wire and then pop it out. Therefore, only when the dart tip has barbs, it’s necessary to use dart grinding device to prevent the barbed darts to hook up dart intraday fiber.

 

In addition to those, tungsten alloy dart accessories include dart repair tools, dart boxes, and dart bags, etc. There are a lot of specifically tailored dart bags for dart players, which are practical and aesthetic.