Tungsten Carbide Floating Reamer Shank Introduction

Details: Category: Tungsten Information; Published on Wednesday, 22 October 2014 17:48

The tungsten carbide floating reamer shank can be applied in boring millers or CNC machining center machine tools, which adopts a structure specially designed, enabling the shank to float along the axial direction or vertical direction or even both. In this way, errors caused by thermal deformation of machine tools, workpiece setting,etc. can be compensated. It is mainly used in the processing occasions where high accuracy reaming is needed.

Currently, the machine tool are increasingly improving its accuracy, however, it is still quite difficult to obtain a high degree of concentricity between the principal axis of machine tool and the hole to be reamed. One reason for the concentricity deviation of the principal axis is the overheat of bearing. Reamers are required to be able to go into holes completely and be free from any radical force, and the tungsten carbide floating reamer shank is designed out of this purpose.