WO3 Applied for Glass Thermal Insulation Coating

WO3 may be used to prepare a new type of transparent glass thermal insulation coating. Apply such coating to architectural glasses, these glasses will no longer be pieces of common glass, and they may allow you to feel cool in the summer, but keep your home warm in the winter.

More details, please visit:
http://www.tungsten-powder.com/tungsten-oxide.html

So, how to construct tungsten trioxide thermal insulation coating? Specifically, the construction steps of heat insulation coating are as follows:

1.0 Preparation: Wear overalls, wear plastic gloves, masks, goggles if necessary, and wear safety helmets and safety ropes for outdoor construction.
2.0 Tool preparation: spray bottle, substrate treatment agent, scouring pad, alcohol, rag, glass scraper, protective tape, plastic protective film, foil paper, detergent, etc.
3.0 Protection of curtain wall and window frame: Wipe the joint around the window frame with alcohol, put a protective tape on it, cover the plastic film, so that the water or liquid will not get on the window frame.
4.0 Substrate treatment: After weaving the scouring pad, apply a proper amount of the substrate treatment agent on the surface of the glass, rub and clean the surface, and scrape it with a glass scraper.
5.0 Alcohol cleaning: Apply evenly on the glass with a rag soaked in alcohol liquid. Be careful not to touch too much liquid. After the alcohol has completely evaporated, spray it with a spray bottle to check if the glass is clean. After scraping with a glass scraper, apply alcohol to allow the substrate impurities to evaporate again.
6.0 Application method: Cut and install special sponge and metal frame according to the width of glass. Then, the heat insulating coating and the curing agent are mixed in a certain ratio, and then injected into the long container. Next, apply the installed metal frame and sponge to coat the glass.
7.0 Drying: Dry-to-touch.
8.0 Acceptance and finishing: Finger-drying acceptance is carried out in the inconspicuous part of the glass surface. After that, the protective film is removed.

• < Prev
• Next >