Variations of stances have been adopted over the years (see below). However the one we will be concentrate on is the throwing arms foot forward. This is to say if you are right handed and you intend to throw with you right hand, then you place your right foot forward to the oche line.

Early throwers would adopt a stance as shown in diagram No.1. Booth feet forward touching the oche line. It seemed to be frowned upon to lean forward or move along the oche line as we see regularly today. You may still see one or two social players using this form of stance but it doesn't help keep the upper body stable therefore very few people use it.

Best foot forward this is sometimes referred too. The lead foot here the right, would indicate a right handed thrower. This is a much better stance and gives more stability to the upper body.

The last diagram shows the lead foot adjacent to the oche line. This requires you to view the board side on twisting your body slightly. Some players find this a little uncomfortable however it reduces the unwanted movement in the upper body. Top players will mainly use stances based upon diagram No2 & 3.

You should line your foot up so that you are central to the dartboard. Movement to either side can be adopted but for beginners this is best practice and most professional keep to this technique. The left foot is situated behind the right. Lean forward slightly placing the bulk of your weight on your lead right foot and adjust you stance slightly (if needed) so that you are comfortable with the position. Your stance should be strong and stable. You should feel comfortable in this position, but at first this will appear alien to you if you have never played before.

The stance will be slightly adjusted during the course of the game i.e. when lining up to hit a double either side of the board or lower board trebles. As the stance acts a bit like a rudder of a boat with the front foot as the pivot and the back moving to the left or to the right naturally changes the angle you face the board. Also bringing your back foot closer to the front foot or further away adjusts your height. Do this with a pair of dividers to see this clearly. Minor adjustments in the stance positions will line the dart throw up correctly. It helps to be conscious of these movements as this will help you later when you need to give self feedback.
 

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Call Three tungsten dart rule is an excellent practice game to really sharpen your accuracy around the board. It may be played by any number of players or teams.

The Object: The object is to have the highest score after 10 rounds of play.

The Scoring: The player’s names are written across the top of the score board in order. Playing order is determined by a throw at bulls-eye, closest tungsten dart plays first. The numbers 1 through 10 are written down the center of the board to indicate the 10 rounds of play.

The Play: The first player goes to the line and the player who is to throw next calls off three numbers for the first player to hit. Any three numbers may be used, 1-20 and bulls-eyes.

The first player now throws one tungsten dart at each of the three numbers in the order called out. Only tungsten darts that land in the called out numbers count and they only count in the proper order. The thin outer "doubles" ring counts as 2 points, the thin inner "triples" ring counts as 3 points and the remaining area of the number count as 1 point. If bulls-eyes are used, the outer bulls-eye counts as 2 points and the inner bulls-eye counts as three points.

The total that was hit is written next to the round-number and play continues on to the next player. After all ten rounds are played, the player with the highest total score wins.

The Strategy: This game has no strategy, it is a game of accuracy. If you play on a tungsten dart team with your opponent(s), you should try to stick to numbers that give them trouble during league games.
 

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Cricket tungsten dart game rule is a game of strategy. You either test your opponent’s nerve or your nerve gets tested. There is a limited group of numbers to shoot for – some call it real estate. The goal is to own as much real estate as you can, while moving forward as quickly as you can. Here are some Cricket tungsten darts Strategies that can help you improve your chances of winning.

Win the bull's eye. The best strategy is to start the game because it gives you a distinct advantage. So you need to win the cork. Challenge strangers to see who can shoot a cork first. Have a bull shoot-out – first player to shoot 20 bulls wins. All of these exercises will work on your ability to shoot a strong cork before a cricket match.

Own real estate on the board. Cricket is a game of strategy so focus on giving yourself options as the game progresses. In order to do so, you need to own real estate. If 20s are closed for your opponent, shoot for your next favorite number, whether that is 19s or 18s. Just make sure to own the next number. By keeping your opponent on his toes you can dominate the match.

Always point your opponent. You have 20s closed and your opponent only has two of the three needed. That depends on your confidence and how good your opponent is, but ALWAYS point. The better a shot he or she is the more you point. If you aren’t confident of the win, then shoot for as many points as you can get. It’ll give you some room to make some mistakes as the game goes on.

Never give up. Cricket is a tungsten dart game rule of strategy. There are plenty of opportunities to turn things around. You may have lost on the top numbers of the board, but remember that the game’s only one-third over. There are three main sections to a cricket tungsten dart game. The top third (20, 19 and 18), the bottom third (17, 16 and 15) and the bull's eye. Never give up and you’ll be surprised at how many games you can turn around in the bottom two-thirds of the match.

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Here are a few guidelines to help you choose your right set of darts:

Try out the different dart barrel grips. Your next step is to try out different barrel grips that are available in the weight you have chosen. Some dart barrels have heavy knurling and others are smooth. Typically, the heavier the knurling the easier it is to grip the dart. However, extremely heavy knurling can cause darts to stick to your fingers and mess with your accuracy. For the typical dart player, there is more than one dart barrel that will work. Just make sure to choose the one feels the best and run with it. Tungsten darts have finest knurling, and so hard to wear out.

Try out different flights. There are many different sizes and styles of flights, including smooth and dimpled surfaces. Try them all out. The size and style of your flights can impact your game. Dimpled surfaces, for example, will help slow down and stabilize your darts. Try out all dart flight sizes and styles until you feel comfortable with your final configuration, but don’t be afraid to experiment as time goes by.

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

First of all, when it comes to choosing what weight and style of darts there isn’t a wrong answer. The only thing to keep in mind is to not spend a lot of money on your first set of darts. Typically you will change darts after your first year of throwing, so don’t spend a lot until you know which dart fits you perfectly. Ultimately, it all comes down to what makes you feel most comfortable when you’re at the line. Here are a few guidelines to help you choose your right set of darts:

Overview of dart types. There are many different darts to choose from: wooden darts, brass darts, nickel/silver darts and tungsten darts. The most popular dart for dart league throwers is the tungsten dart because a high-density tungsten dart will resist wear and creates a smaller barrel that allows tighter groupings of darts. Brass and nickel/silver darts are cheaper and are made from softer metal darts meaning the knurling can wear down quickly from skin oils, friction and contact from other darts. When buying tungsten darts you need to pay attention to the packaging because the percentage of tungsten is very important to the quality of the dart. The main benefit of a high-quality tungsten dart is that the barrel will be smaller so you will be able to throw tighter groupings of darts, minimizing bounce outs.

Try out multiple dart weights. Darts are available in weights from 12 grams to 50 grams. It is rare to see someone throwing with darts heavier than 30 grams, but most dart organizations allow for darts up to 50 grams. Make a visit to your local dart store and throw the same dart style in each weight class. The speed in which you throw the dart will help determine which weight to choose. The lighter the dart the harder/faster you have to throw it. The location of the weight on the dart barrel is also important. Some darts are heavier towards the front of the dart (front-loaded) and others are back-weighted. Try them all and you’ll develop a feel for what works best for you and your throwing style.
 

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

We all fall into a rut from time to time. But how do you know if it’s just one bad night of throwing or if it’s the beginnings of a full-fledged slump? Here are few things to help you get out of tungsten dart throwing slump:

Never back down. Regardless of how you’re throwing, never approach the line with defeat on your mind. If you are already thinking negative thoughts chances are you will fulfill those thoughts. Always remember every dart is a new dart. Your three tungsten darts are completely independent of each other so keep pushing yourself with every throw.

Don't over-think it. Always remember that it’s a bigger deal to you than it is to everyone else. So don’t over think it. The moment you start foreseeing your tungsten darts missing the target is the moment of no return. Dig deep and find your confidence. Grip it and rip it. You’ll be back in top shape before you know it.

Don't change your throwing style. We’ve all been there before. You aren’t throwing like you expect. So, in a fit of desperation you begin to alter your stance, your grip or your throw. This is the worst time to make changes. Typically a slump isn’t due to the mechanics of your throw. More often than not it’s due to psychological reasons. Keep your style the same and change your outlook. This would be a great time to use positive visualization techniques, such as remembering your best 501 finish. Remember how you felt when you threw that last tungsten dart and it landed right on target! Change the way you're looking at your tungsten darts and you will notice a difference.

Calm your nerves. The calmer you are the better you will throw. Concentrate on controlling your breathing and think about something pleasant, like your last vacation. The goal is to slow down your heart rate and kill any nervous jitters you may have. Take your frustration out on the tungsten dart board. It’s much easier said than done, but try to avoid getting mad or emotional. Focus your frustration at the dartboard, but don't throw your tungsten darts as hard as you can. Instead, take out your frustrations on the board by concentrating on what you're aiming at and you will forget about your slump in no time.
 

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

The basic principle of tungsten carbide rotary atomizing nozzle is that provides liquid for high-speed rotation center so that the liquid surrounding the rotating element or thrown bore, it is by means of centrifugal force and air power to atomize. When the flow is small, the centrifugal force is stronger than the liquid surface tension, and turntable edge throws a few large droplets and divides directly.

While the flow and speed increases, the liquid is drawn into much filamentous flow and becomes very unstable. The liquid leaving the rim at a distance due to the effect of friction with the surrounding air is separated into small droplets. As the flow and speed increases to a certain extent, the liquid film becomes thinner outwardly extended, and separated from the friction with the surrounding atomization at the same time.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Compared with straight-flow atomizing nozzle, centrifugal nozzle working principle is more difficult. In the beginning, the given velocity of liquid is low, the liquid surface tension and inertial force plays an important role. Even if liquid surface tension is stronger than inertial force, liquid film shrinks into vacuole, it will still break up and become drops under aerodynamic. With the increasing pressure and spraying speed, film liquid will become instable and break up because of inertial force. Finally, the ribbon-shaped film liquid will vibrate against air movement so that liquid surface tension and viscosity become weaker gradually, and atomizing under higher pressure.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

According to atomizing type, they can be divided into pressure atomizing nozzle, rotary atomizing nozzle and media atomizing nozzle. Tungsten carbide pressure atomizing nozzle will spray flow to steady or low-speed airflow for atomizing under high fluid pressure. While different structures of ways inside have different atomizing process, they can be specifically divided into straight-flow atomizing process and centrifugal film-liquid atomizing process. The straight-flow atomizing process is simple, which includes liquid surface tension, viscosity and air resistance. Liquid turns drops, smooth flow and wavy flow into atomization gradually.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

The influence of welding time for quality: In a short time, the welded surface fully physical contact gradually, and diffusion of atoms become sufficient, welding shear strength and welding rate increases by welding time steadily. However, when the strength of soldering seam reaches the strength of tungsten carbide, if adding welding time continuously, it will make tungsten carbide particles become bigger and bigger so that some micro-bore will appear and the strength of soldering seam will decrease, which because of the different spreading speed between Co and Ni. Therefore, reasonable welding time is a guarantee for improving the soldering seam strength.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn