Tungsten Carbide Double-edged Boring Tool’s Features
- Details
- Category: Tungsten Information
- Published on Tuesday, 22 July 2014 14:58
- Hits: 587
The tungsten carbide double-edged boring tool’s both side symmetrically at the center of rotation of the blade, and also participate in cutting feed resistance generated symmetrical balance, radial component which cancel each other out, no longer affected by the spindle and swing around. It completely eliminates the single-blade knife’s boring bar unidirectional force, resulting in the spindle shaking and, therefore, apply to be mounted on a vertical radial drilling boring. The tungsten carbide double-edged boring tool’s head is easy to find the blade , and the radial dimension of the head can be fine tuned to be gradually enlarged, especially for those who simply boring circle, and the position accuracy is not too high bore.
As the head of the expansion volume can be adjusted, and thus a large aperture range of machining can be boring Ø80 a 150mm hole can also be boring certain size blind hole.
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Tungsten Carbide Double-edged Boring Tool’s Attention Matters
- Details
- Category: Tungsten Information
- Published on Tuesday, 22 July 2014 14:56
- Hits: 596
The key to using the tungsten carbide double-edged boring tool is to ensure that the two edges of the boring bar symmetry center, from sharpening knives should pay attention to the loading point, otherwise easily occur when a single-edged knife to eat boring, tungsten carbide double-edged boring bar caused by unidirectional force, destruction of machine tool’s stability and affect accuracy.
From machine to ensure stability considerations, tungsten carbide double-edged boring tool should only be taken when the boring low-speed small amount of feed. Its speed and feed rate was 25r/min and 0.04mm / r, eating knife depth is about 0.5mm.
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Tungsten Carbide Elbow Boring Tool
- Details
- Category: Tungsten Information
- Published on Tuesday, 22 July 2014 14:54
- Hits: 579
Tungsten carbide elbow boring tool is an indispensable tool for machining precision holes , precision machining holes which can reach IT6 level. Tungsten carbide elbow boring tool’ surface roughness can be achieved 'Ra0.8 ~ 1.6μm, a common type of fine-tuning has threaded boring tool , eccentric boring tool trimming chute double-edged sword, and floating boring boring knives.
The tungsten carbide boring tool to fine-tune different characteristics, widely used in the actual production, in which the thread trimming differential boring tool novel, high-precision fine-tuning can automatically eliminate the thread gap, is a kind of fine-tuning promising boring tool.
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Tungsten Carbide Double-edged Boring Tool
- Details
- Category: Tungsten Information
- Published on Tuesday, 22 July 2014 14:55
- Hits: 563
Tungsten carbide double-edged boring tool, having adjusting the knife slide, capping and adjusting screws and other components. Look at the picture below. Arbor adopts material 40Cr to finish transfer material, arbor bulk processed two symmetrical chute as loaded knife slot, arbor shank for Morse taper shank on the 5th. arbor bore concentricity of the taper shank of 0.01mm, cylindrical blade adjustment slider and arbor bore with the gap of not more than 0.02mm, the next part really a cone angle of the cone is 40 °.
Segment materials of tungsten carbide double-edged boring tool uses 10mm × 12mm high speed steel material, while sharpening angle twice the length of the blade and the blade should be exactly the same, in order to ensure a higher degree of symmetry twice after put the knife holes.
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Tungsten Carbide Ordinary Single Blade Boring Tool
- Details
- Category: Tungsten Information
- Published on Tuesday, 22 July 2014 14:52
- Hits: 620
Tungsten carbide ordinary single blade boring tool only has one main cutting edge, regardless of roughing or finishing can be applied, but lower productivity. Because tungsten carbide ordinary single blade boring tool has poor stiffness, so it’s easy to cause bending deformation, in order to reduce the radial deformation and vibration resistance when boring and boring bars, generally take a larger main angle, κ r = 75 ° ~ 90 ° .
Its hole is a common processing method and processing a wide range, can be rough, but also for finishing.
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
sales@chinatungsten.com
闽公网安备 35020602000140号