The process of depositing a thin layer of gold over another metal for added beauty and durability has been used commercially since the late 1800s. Besides the glamor of having gold detailing or the appearance of solid gold on a piece, gold is plated for industrial purposes and is important for use in circuit boards. There are two main electroplating methods, tank and brush. Both involve use of electric current, electrodes (anode and cathode) and an electrolyte solution or preparation containing gold.

Cleaners
The object or areas to be plated have to be absolutely clean for plating to occur properly. In order to remove both organic and inorganic materials as well as grit and soil, a combination of different treatments are used, including acid cleaners, alkaline cleaners, abrasives and solvents.

Pretreaters
Depending on the type of metal to be plated, treatment may be needed to deposit an intermediate plating metal or smooth the surface layer for gold deposition. For instance, in plating gold onto a copper alloy, nickel is plated first, then gold. Sometimes other finishes, such as chrome, need to be removed with a chemical stripping agent.

Electrolyte Solutions
In order to get an electrolyte, the metal has to be in a state where it can disassociate and form ions. Gold is a stable metal and it takes harsh chemicals to accomplish this. Usually gold is complexed with cyanide, called cyanaurate, although techniques using sulfites and thiosulfites exist. There are many proprietary formulae for these solutions. In tank electroplating, cyanaurate is dissolved in an acidic bath that receives the electrodes. In brush electroplating, an applicator with a stainless steel core puts on the cyanaurate as a gel. Electric current passes from the steel applicator to the metal object being plated as the gel goes on.

Acids
The pH of the electroplating solutions for tank electroplating have to be adjusted to prevent formation of hydrogen cyanide, a lethal gas, at pH values above eight. However, below pH three, cyanaurate precipitates out of solution. Both inorganic and organic acids have been used to adjust pH in the workable range, including phosphoric acid, sulphuric acid and citric acid.

Other Additives
Brighteners are metal salts of transitional metals like cobalt, nickel and iron. They give improved wear resistance and brighter colors to the gold deposit. Some organic compounds are added to improve the density of the gold plating. Some of these organic additives are polyethyleneimine, pyridine sulphonic acid, quinoline sulphonic acid, picoline sulphonic acid and substituted pyridine compounds. Buffering agents such as a citrate/oxalate buffer can be added to help keep pH in the proper range. Wetting agents may be added as well.

Gold plated Tungsten Product Manufacturer & Supplier: Chinatungsten Online - http://paper-weight.cn/
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

A shares during the year as the third-largest IPO, it is the second Zijin Mining (601,899) second after only less than 1 yuan face value of the A shares.The combination of these two gimmicks CMOC (603993) planned debut in Beijing held its first A-share market live roadshow, the day the scene of the institution who is just 70 or so.

Electron gun is accelerated electron bombardment of a target screen, the light emitting device which emits a certain energy, speed and angle of a beam and electron beam.

Introduction wire cutting molybdenum wire, wire cutting molybdenum wire protection, accelerator Tudou-0. Line cutting controller, molybdenum wire diameter of 0.14 4A current.

Organic molybdenum friction-reducing mechanism of lubrication and friction on the polished surface, the friction of the surface, the pressure in the high-load points, cutting-edge chemical promote, promote organic molybdenum decomposition of the MOS2 and certain phosphide , sulfides, nitrides, etc. These product was dispersed in an oil solvent adsorbed and deposited on the friction surface, molybdenum disulfide film is formed covering the anti-wear layer, so as to reduce friction, wear and lubrication.

Molybdenum element made of additives as a car engine fuel additives, may not be fuel efficient, but after the video shown to play a role in lubrication.

Base oil antifriction organic molybdenum additive effect its type, there is a direct relationship between dosage, sulfur, phosphorus organic molybdenum additive has better friction reduction; with dosage increases, the organic molybdenum antifriction additives effect increases; in the finished oil, organic molybdenum additive at 1.0% plus volume down, have shown very good friction reduction.

Molybdenum involved in plant nitrogen metabolism in vivo, and promote the absorption of phosphorus and transport, transport of carbohydrates also plays an important role. Crop molybdenum common manifestations are small plant, growth inhibition, leaf chlorosis, wilt resulting necrosis. Leguminous crops molybdenum, nodule dysplasia, tumor is small and less nitrogen fixation capacity is weak or unable to fix nitrogen, leguminous crops due for molybdenum have special needs, it is prone to the phenomenon of molybdenum, for molybdenum fertilizer should be applied in the first focus leguminous crops. Molybdenum in acidic soils, most likely, sandy soil molybdenum common than clayey soil. As the soil pH increases, the effectiveness of molybdenum increases.

Molybdenum process video.

Demonstrates the tungsten tip dart Gangbiao replacement video tutorials.

2013 World Darts Championship first round Painter vs Leung game video.