Many people either aim naturally and don’t think about it or don’t actively aim at all. Either way, you should pay attention to aiming. By truly concentrating on the board you can feel your focus being drawn into the diagonal lines. Then try to imagine your target area is bigger than it really is. Experiment with the following aiming options and make sure to practice. The key to consistent aiming is practicing until it becomes second nature.

Here are few things you should know about how to aiming your tungsten darts:

Find a sight line. Some people use a sight line on their throwing hand to help them aim. For example, you could use the first or second knuckle on the thumb of your throwing hand. Some people use the tip of the tungsten dart. Others use the small finger of the throwing hand to line up properly. The ultimate goal with a sight line is to line up your shot consistently.

Lead with your elbow. Just like some pitchers in baseball lead their pitch with the elbow, you can lead your tungsten dart throw with your elbow. You start by being aware of where your elbow is pointing. Make sure your elbow is pointing slightly up and directly at the dartboard. When you start your throw your elbow leads the process followed by the basic mechanics of your throw.

Aim directly at your target. Some people try to aim to the left or right of the real target. This is just lazy tungsten darts and can lead to technical and mental problems the longer you throw. If you are aiming at triple 20 and you miss to the left then aim directly in the middle of the triple 20 again. Don’t try to aim to the right to overcompensate for the last throw.

Know your dominant eye. Everyone has a dominate eye and it’s important to make sure you lead your aiming with that eye. If you don’t know which of your eyes is dominant take turns throwing three tungsten darts with each eye closed. Which ever eye you have to struggle to keep closed while you throw your tungsten darts is your dominate eye. Make sure you lead with this eye and you will naturally gain confidence as your throw.

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

No matter what style of throw you use, always remember that it should be a consistent and comfortable throwing motion. The more consistent your mechanics the better you will throw. Experiment with different throwing motions to develop your style and then pick one style and practice until the motion becomes second nature. Your throw is one of the most important elements of the tungsten dart game. Take some time to analyze your throw and develop some good habits.

Advanced tungsten darts throwing techniques should incorporate the following:

Minimize movement. Only the shooting arm moves. Your shoulder should stay completely still, as should the rest of your body. You’ll make the game easier by keeping as still as possible while throwing. A steady and controlled back swing is critical to accuracy. Very few people can throw accurately without a back swing. And one smooth and fluid motion to the board is critical. Try to minimize any side-to-side motion.

Consistent release. This is very difficult to monitor, however a reliable release point for your tungsten dart throw is crucial to achieving consistency. Some players release the tungsten dart early in the throw, when the arm has just begun the forward motion. Others wait longer and release the tungsten dart at the very end of the throwing motion. Find out what is most comfortable for you and practice consistency with the release point.

Snapping the wrist. Not all players snap their wrist at the end of the throw because it is one more thing that can go wrong in the throw. However, it does help with acceleration in the last phase of your throw. A slower, controlled throw can increase accuracy and snapping your wrist like a whip can provide sufficient speed at the end of the throw.

Follow-through. A follow-through is critical. When a great basketball player takes a shot his hand follows through the motion of shooting the ball. Tungsten darts requires the same motion. At the end of your throw your fingers should be pointing at your target or down towards the floor. If you are pointing up to the sky then you probably aren't following through properly.

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

The throw is the most important element of a successful tungsten dart player. And yet, most players don’t analyze this critical aspect of their tungsten dart game. Most people go with what feels most comfortable without thinking about how they could be sabotaging their tungsten dart game. The next time you are shooting tungsten darts, take a closer look at how other people throw tungsten darts. Some rock back and forth, some lunging forward with every throw, some throw quickly and without a follow-through, and others balance on one foot.

Every throw is unique, but here are few things you should know before you develop your tungsten dart throw:

Proper alignment. The first step to a good throw is aligning your shoulder, elbow and hand in a straight line. All three should point at the board. Some people move their elbow slightly to the left or to the right depending on personal preference, but don’t go too far with this movement because it can develop into bad mechanics.

Steady throwing motion. The ideal throwing motion is similar to how you would swing a hammer. Using your elbow, hand, wrist for speed, your shoulder for support. As you extend your arm the elbow should rise up and create the force needed to speed the tungsten dart towards the board.

Holding the tungsten dart. Don’t hold the dart sideways at the beginning of your throw. To achieve a high level of skill at tungsten darts all non-essential motions should be minimized or avoided. Keep your tungsten darts level and pointed directly at the target.

Balanced stance. A strong center of balance is very important to the throw. Whatever you do, make sure you’re balanced when throwing. Leaning or swaying is typically a bad idea because it makes the tungsten dart board not only a small target, but a moving target.

  Tungsten Dart Manufacturer & Supplier: Chinatungsten Online - http://www.chinadart.com/
  Tel.: 86 592 5129696; Fax: 86 592 5129797
  Email:  sales@chinatungsten.com
  Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
  Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
  Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Positive ion cathode temperature is relatively low because of cerium tungsten electrodes, it is possible to make the cathode spot and the spots on the surface of the electrode region near the evaporated material in the form of referrals from easily condensed to a cathode potential minimum cathode spots. Thus, life and allow current increase in plasma cutting, water cooled anode and cathode role to play, while inhibiting the excessive evaporation and diffusion of active substance. But also it may be cerium tungsten electrode tip achieve a better balance of evaporation and condensation to form a "natural sharpening" feature. This "natural sharpening" feature enables sustained high arc stability, electrode and nozzle life expectancy. Thorium tungsten electrode work function higher than cerium tungsten electrode, the cathode pressure drop is relatively large, and the cathode spot withstand the current is large, when there is more than this cathode spots can withstand the maximum current flows cathode spot immediately He began to split. Because the cathode spot (in a molten state) is in the positive ion bombardment by the conditions of the formation, so to increase their number will make the cathode temperature rise, leading to the electrodes evaporated in serious condition, and even lead to the ends of the electrodes contraction phenomenon, and Arc will produce drift, resulting in decreased electrode life.

 

Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
 Tel.: 86 592 5129696; Fax: 86 592 5129797
 Email: sales@chinatungsten.com
 Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
 Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Cerium tungsten electrode arc performance is better (with respect to thorium tungsten electrode), this is because: With the decline in work function of cerium tungsten electrode, the cathode fall will be reduced, so that the cathode spot become smaller, and ultimately launch also be able to concentrate. As the arc current increases, the arc generated by the magnetic field with increasing pressure of the heart, and therefore, the arc will be compressed (by a large current), finally the emission current density of the cerium tungsten electrode will be improved.

When welding the work piece, at the central axis of the arc, the density of metal vapor generated when the arc heating weld pieces is the highest, and its resistance is relatively large. In addition, when the cathode voltage drop down, the cathode arc spots loss will be reduced, so that the construction arc can also be carried out at low current, and the arc is easier to stretch, which creates the conditions for the metal foil welding.



 

Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
 Tel.: 86 592 5129696; Fax: 86 592 5129797
 Email: sales@chinatungsten.com
 Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
 Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Reverse polarity test
Experiment one
Experimental Materials: 2% Ce-W tungsten cerium electrode, 4% Ce-W cerium tungsten electrode, 2% Tn-W thorium tungsten electrode
Electrode requirements: a diameter of 5mm;
Experimental procedure: Under the condition of current = 80A, make the electrode ends flat, fixed and vertical, burn 20minute;
The results: 2% / 4% Ce-W cerium tungsten electrode is not stable at the beginning, and then it stabilizes; whereas arc of 2% Tn-W thorium tungsten electrode is always unstable.
Experiment two
Experimental materials: it is the same with the” Experiment one”
Electrode requirements: a diameter of 7mm;
Experimental procedure: Under current = 105A conditions, burning 12 minute;
Experimental results: loss of 4% Ce-W cerium tungsten electrode is the smallest one.

Positive polarity test
Experimental materials: the same with the” Experiment one”
Electrode requirements: a diameter of 5mm;
Results: Under the same conditions, the damage of the three kind of electrode, the damage of 2% Tn-W thorium tungsten electrode is most serious, while the case of 4% Ce-W cerium tungsten electrode is preferably.

Exchange experiments
Experimental materials: the same with the” Experiment one”
Electrode requirements: a diameter of 5mm;
Experimental procedure: Under the same conditions of exchange experiments;
The results: the case of 2% Ce-W cerium tungsten electrode is the best, 2% Tn-W thorium tungsten electrode followed.

 

Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
 Tel.: 86 592 5129696; Fax: 86 592 5129797
 Email: sales@chinatungsten.com
 Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
 Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Pure tungsten electrode is the first one kind of electrode used in TIG welding technology. TIG, whose English full name is Tungsten Inert Gas, often called non-MIG welding. TIG is a kind of gas shielded welding method, in which inert gas (argon) as a protective medium, and tungsten electrode in which is only playing a conductive role without melting, there will be arcing between them when it is energized, tungsten electrode and the workpiece. During the welding process, it can be filled with wire or without wire. If you need to fill in the wire, the wire should be filled from the front of tungsten.

TIG welding can be divided into: manual welding, automatic welding, in which manual welding of pure tungsten electrode is widely used, and in the aerospace industry, it has been used on welding high-quality work.
TIG welding technology has the following advantage: good welding quality; convenient operation of the arc and the pool (due to its good visibility); without little or no slag (because it does not using flux), and you do not need to clean up slag after welding.
Pure tungsten or activated tungsten - thorium tungsten, cerium tungsten, zirconium tungsten, lanthanum tungsten, as non-consumable electrode to shield arc, and it having high quality but its welding speed is relatively slow.



 

Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
 Tel.: 86 592 5129696; Fax: 86 592 5129797
 Email: sales@chinatungsten.com
 Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
 Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

In the beginning, tungsten carbide porous nozzle uses the impact of water-flow for rock cracking. After that it depends on the returned flow for scouring the wall and associate with jet-flow pressure, which deepens the hole and increases the volume. Some related experimental statistics show that the growth of aperture will decrease with as time goes by and every type of nozzles are similar, which explains that tungsten carbide porous nozzle aperture is determined by the diameter of hole D and less influenced by quantity of holes. In addition, with the increasing numbers of spraying holes, the roundness of hole will increase. And less holes will make flow disperse and can not connect well, which make it out of round.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

First of all, the time of erosion has an influence on the efficiency of tungsten carbide porous nozzle for drilling. Generally, if erosion time is longer, the aperture, hole depth and the broken volume will increase. However, the raising trends will be different due to various types of nozzles. As tungsten carbide porous nozzle, with time goes by, the hole depth and broken volume will increasing remarkably at the beginning and tend to gently. It is proves that the principle of water-flow for rock cracking is a dynamic process and has obvious periodicity.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

There are two common difficulties when tungsten carbide sand-blasting is working. One is the difficult suction, the other one is about abrasion. The main reason is the size of the sand entry is too small and the vacuum is not enough. While the inside blowhole do not match the straight section mixed with sand and water or the material of straight section mixed with sand and water is inappropriate so that the nozzle is badly abrasive.

Therefore, the quality of tungsten carbide sand-blasting nozzle is determined by inhaling tube diameter, the size of blowhole, the straight sections and the materials. Controlling the distance of nozzle and steel plate is the most importance to achieve the best result. In addition, adding corrosion inhibitor will prevent the metal surface from two-stage oxidation.

Tungsten Carbide Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-carbide.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn