Tungsten News

Tungsten difficult to take the goods, price continues to fall

Details: Category: Tungsten's News; Published on Friday, 07 November 2014 13:56; Hits: 918

This month Ganzhou tungsten APT Association released the latest forecast average price of 152,000 yuan / ton, compared with October down 8000 yuan / ton, with larger decreases, it is still far higher than the actual market price. It is understood, APT manufacturers offer concentrated in the 14.9-15 yuan / ton, then the actual trading 145,000 yuan / ton immune to take the goods. APT smelter home runs difficulties increase, the lack of effective support for the market late, late mainstream market quotations or fell to 145,000 yuan / ton in the vicinity, and more ground gas.

Sodium tungstate tablet market unsalable serious, factory orders scarce, sodium tungstate smelter is a small multi-family starts, strict control of raw material procurement and product inventory. Individual businesses eager to sell stock to ease the financial pressure, and lower pricing, resulting in 96% sodium tungstate market price is slightly confusing, within 11.4-12 yuan / ton price range have appeared.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten scrap prices continue to fall, low-cost emerging

Details: Category: Tungsten's News; Published on Friday, 07 November 2014 13:53; Hits: 834

After this month, guided tungsten ore bodies down, tungsten City pessimism spread, waste tungsten market confidence slump, businesses will significantly enhance Paohuo, low-cost emerging, some shipments have been at a loss, the downstream demand still in the doldrums, the overall volume of partial low. Short-term market is expected to more than scrap tungsten will continue to run downwards.

Tungsten scrap prices continue to fall. Currently scrap tungsten drill price excluding tax concentrated in 162-165 yuan / kg, down 4 yuan. Imported scrap tungsten blades and drawing dies 157-161 yuan / kg, down 2-3 yuan, 155 yuan a small amount of the transaction. Domestic scrap tungsten blade 150-153 yuan / kg, transient stability. 70 degrees above the grinding tungsten scrap material 1.5-1.55 yuan / kWh, 50-70 degrees 1.45-1.5 yuan / kWh, 30-40 degrees 1.3-1.35 yuan / kWh, transient stability.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Further Studies on Tungsten Carbide Cutting Tool Fatigue Are Needed

Details: Category: Tungsten's News; Published on Thursday, 06 November 2014 18:27; Hits: 945

Tungsten carbide cutting tool, with high intensity, abrasion resistance and hardness, is widely used in the cutting machining. However, the tungsten carbide cutting tool fatigue problem is one of the primary reasons that are restraining its growth.

Tungsten carbide cutting tool is normally used in bad working condition and has to suffer from cyclic loading, thermal cycling and corrosion. Tungsten carbide cutting tool fatigue is one main factor contributing to tool damage. The types of tool fatigue include mechanical fatigue, thermal fatigue, corrosion fatigue, etc. In mechanical fatigue, tools suffer from alternating tension and compression as well as impact under cyclic loading and finally produce fatigue crack even if the mechanical stress has not yet reached the limit of tungsten carbide’s intensity. In thermal fatigue, the tungsten carbide cutting tool, interacting with its environment, surfers from thermal cycling, which results in its Internal energy changing and finally the tool material will produce crack source which can expand to microcracks. In corrosion fatigue, the components interact with the corrosion medium in the environment when used and caused crack or break. However, in is in fact that these types of fatigues are interacting at the same time during the actual applications of tungsten carbide cutting tools.

Currently, the reports about tungsten carbide cutting tools intensity account for a great majority, while researches about its toughness and fatigue property are few. In order to improve the core competitiveness in the international market especially the high-end product area, China should carry out further researches on the tungsten carbide cutting tool fatigue problem.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Gan County tungsten industry's core competitiveness enhancement

Details: Category: Tungsten's News; Published on Thursday, 06 November 2014 14:43; Hits: 979

In recent years, relying on the advantages of tungsten processing Gan County, the county, and actively support the business of large projects, extend the industrial chain, enhance core competitiveness. Has formed industrial clusters, becoming one of the tungsten industry chain counties nationwide longest. Have high-quality nano-tungsten powder, tungsten carbide rods and other high-tech products, especially the production of tungsten carbide materials, precision mold parts, metal machinery and parts, and other products, has a high melting point, high hardness and wear resistance and irreplaceable advantages of corrosion resistance, widely used in petroleum machinery, aerospace, lighting, chemical exploration, knives, drill and other industries.

Currently, the county has more than 11 scale tungsten processing enterprises, with annual production scale and capacity: 4,000 tons of tungsten concentrates, ammonium paratungstate 10,000 tons, 5,000 tons of tungsten oxide, tungsten powder (containing tungsten carbide powder) 4500 tons, tungsten carbide (tungsten steel) materials 1000 tons, tungsten, iron 6,000 tons / year, tungsten alloy powder 500 tons, CK powder 500 tons, precision metal mold (workers) with 500 tons. 2013, above the county-scale tungsten processing enterprises realized main business income of 8 billion yuan, profits and taxes of 571 million yuan.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Have reduced the market price of tungsten, ore prices hovering low

Details: Category: Tungsten's News; Published on Thursday, 06 November 2014 14:40; Hits: 1131

Tungsten market: tungsten Association yesterday afternoon, Minmetals, Jiang W tripartite announced November prices are down, tungsten Association guide price, as we did last month fell to 95,000 yuan expect / ton, the actual spot market 60 wolframite price concentrated in 9.1-9.2 yuan / ton, or expected short-term ore price hovering at 9-9.3 yuan / ton. Tungsten powder and tungsten carbide prices continue to decline, the market mentality is very pessimistic, most businesses have been reluctant to deal with the offer, the market increasingly strong bearish sentiment.

Tungsten ore guided sharply lower, bearish market sentiment strong

Details: Category: Tungsten's News; Published on Thursday, 06 November 2014 14:37; Hits: 889

Yesterday announced the offer, tungsten end demand continues to slump, the market lacks effective support, and lack of business confidence, tungsten Association yesterday afternoon, Minmetals, Jiang W tripartite announced November prices are down, the market is increasingly strong bearish sentiment.

Ganzhou Tungsten Association guide price, as we did last month fell to 95,000 yuan expect / ton, learned of the transaction on the spot market wolframite concentrate at 9-9.2 yuan / ton vicinity, mainstream or expected short-term ore prices hovering in 9-9.3 Wan yuan / ton.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten Carbide Cutting Tool Technology Promotes Chinese Tungsten Industry

Details: Category: Tungsten's News; Published on Wednesday, 05 November 2014 18:34; Hits: 1302

Tungsten carbide cutting tool’s main component is tungsten, and it is the most widely used end product in the industry chain of tungsten materials. Because its technological level directly reflects that of the tungsten industry in China and therefore is essential for whether China can turn from a country with large tungsten resources into a country with high tungsten related technology. Acknowledged by the rest of the world, China is rich in tungsten resources and ranks first around the world in tungsten resources, output, export and consumption. However, the advantage of rich tungsten resources has still far from being transformed into industrial advantage. The shortages of domestic tungsten industry, compared with the tungsten industry abroad, lie in: (1) the overall backwardness in technical equipment; (2) the weakness of independent innovation capability; (3) the oversupply of low-end and regular carbide cutting tool products and insufficient supply and technological reserve of high-end and high-property carbide cutting tools; (4) the dissociation between tungsten carbide material production and tungsten carbide cutting tool production, which has restrained the further development of high-end tungsten carbide cutting tools.

The above mentioned shortages are failed to be solved, so that currently, the supply of high-property tungsten carbide materials and high-end tungsten carbide cutting tools lies in the hands of some developed countries like America, Japan, etc. China then has to spend over 1 billion dollars to import those high-end products like tungsten carbide cutting tools each year. This kind of state of affair is extremely inconsistent with China’s status as a country with the most tungsten resources. China has to accelerate the development in tungsten powder material, high-property tungsten carbide material and cutting tool design, etc., and foster the technical and industrial advantages in the key links of tungsten industry, only by which can China’s tungsten carbide material, cutting tool technology and product quality be improved significantly and thus help China to turn from a country with large tungsten resources into a country with high tungsten related technology.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten Carbide Cutting Tool Industry in China Faces Talent Shortage

Details: Category: Tungsten's News; Published on Wednesday, 05 November 2014 18:30; Hits: 1121

Tungsten carbide cutting tool industry has been through over ten years’ rapid development in China, but now, it meets its bottleneck. There are quite a number of difficulties in the current cutting tool industry, and the best solution to these problems would lie in the establishment of a high-quality talent team.

The modern cutting technology develops on the basis of material science, equipment manufacturing technology, information technology, etc. The professional areas it covers have exceeded the category of the traditional cutting technology profession. Therefore, the restructuring of professional talents is also required. Due to the importance of tungsten carbide cutting tool material and its coating technology, new professions and talents should be introduced accordingly.

In addition, because there are no longer metal cutting and cutting tool majors in undergraduate colleges, the majority of college students newly introduced lack cutting technique and basic cutting tool knowledge which are essential to people who engaged in this industry, like cutting tool designers and developers, material developers, coating grade developers and even salesmen. They all should be able to analyze the existing problems, improvement areas and innovation prospects by using all of this knowledge.

A group of inter-disciplinary talents of tungsten carbide cutting tool industry is vital to the development of the whole tungsten carbide cutting industry. With the transformation of enterprises, anther group of talents of field service with certain cutting technology knowledge should also be cultivated to be the technological support for salesmen.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten Carbide Cutting Tool Market in China Still Needs Improvement

Details: Category: Tungsten's News; Published on Wednesday, 05 November 2014 18:29; Hits: 1104

Tungsten carbide cutting tool output in China maintains a sustainable growth, which places tungsten carbide cutting tools in a dominant position among various kinds of cutting tools. However, from the current situation in Chinese market, the domestic market share of tungsten carbide cutting tools is still lower that of the import ones. Therefore, the adjustment of the industrial structure is extremely urgent.

There are three main reasons that can account for the lower market share of the homemade tungsten carbide cutting tools:

I. Some manufacturers of tungsten carbide cutting tools in China lack enough quality awareness.

II. Many tungsten carbide cutting tool companies abroad provide thoughtful service including selecting, transporting, adjusting and replacing cutting tools for customers, which is neglected by the majority of manufacturers in China.

III. Some tungsten carbide cutting tool factories still remain the kind of production mode of individual workshop with low technological level and are always poorly equipped, which can not ensure the product quality.

From the current situation, tungsten carbide material has been in the dominant position among various kinds of cutting tool materials because it has better properties and higher cutting efficiency. However, if the tungsten carbide cutting tool enterprises want to achieve further and better development, they need to make industrial structure adjustment as soon as possible and accelerate the construction of production bases.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten Market volume was light, many businesses wait wait

Details: Category: Tungsten's News; Published on Wednesday, 05 November 2014 14:01; Hits: 965

Tungsten market: by funding constraints and inventory pressure dragged the market today continues to run low tungsten, tungsten concentrate market price interval low dropping again, and then thinly traded spot market, many businesses wait wait guided introduction. Tungsten powder and tungsten carbide prices continue to fall, it has been consistent with the regeneration of tungsten prices. Market sentiment is very pessimistic, most businesses have been reluctant transactions with quotes, the overall turnover in the doldrums. Terminal steel demand is also declining, less demand for ferro-tungsten, tungsten iron manufacturers generally take the goods difficult, most manufacturers have cut tungsten iron / discontinued operation.