How to Build Darts
- Details
- Category: Tungsten Dart News & Info
- Published on Friday, 18 October 2013 09:17
Darts are often used in accuracy games. Perhaps their most popular use is on dart boards. Lawn darts and blowgun darts are also popular. While darts can be constructed out of regular household material quite easily, it is important to remember safety. Without properly observing your surroundings before throwing or shooting a dart, you could injure or kill someone. But darts can be fun, and that is what they are usually designed for, though other darts, such as poisonous ones, can be used for hunting.
1.Thread a sewing needle. Leave 1 inch of thread exiting the needle's eye on each side.
2.Tie a knot so the thread is secure to the needle. Repeat as many times as you can until you can't put any more thread through the hole, about 15 times.
3.Take the eraser off the pencil. Put the needle through the top of the eraser until the end of the threads are just underneath the top of the eraser.
4.Cut the end off a pencil at the base of the eraser. Cut four notches 1/4 inch deep in the end of the pencil to form a cross. It should look like a Phillips-head screwdriver can fit into it.
5.Cut four small diamond-shaped pieces that are 1 inch in diameter each. Apply glue to the inside of the four notches at the end of the pencil.
6.Place a cardboard diamond into each notch. These are your guiding fins. Sharpen the end of the pencil.
Tungsten Dart Manufacturer & Supplier: Chinatungsten Online –http://www.chinadart.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn