Cesium Doped Tungsten Oxide Nanopowder Applied for Heat Insulating Window Glass

Cesium doped tungsten oxide nanopowder may be used to prepare an environmentally-friendly thermal insulation coating, and therefore be sprayed onto automotive glass to obtain heat insulating window glass. In order to obtain automotive glass with high heat insulation property, high visible light transmittance, high UV shielding rate, more durability, easy construction and privacy protection, experts introduced the following spraying methods:

More details, please visit:
http://www.tungsten-powder.com/cesium-tungsten-bronze-chinatungsten.html

First of all, the car to be sprayed should be placed in a confined space with an air inlet and outlet system. The air inlet should be filtered through the filter material and fully dipped in a three-dimensional rubber top filter. The size of the filter material must be able to filter out all the particles larger than 5 microns. The particles need to be filtered by activated carbon to ensure no harm to the environment. The design of the inlet and outlet ports must be such that the air circulation in the entire enclosed workshop is evenly distributed from top to bottom to ensure the cleanness of the entire indoor air. The temperature is controlled at 20-35°C and the humidity is controlled below 80%. Before spraying, the glass should be cleaned and the body protected. In other words, the surface of the car should be protected from spraying, to ensure that it will not be contaminated. Then, the spray material of nano cesium doped tungsten oxide is poured into a watering can for spraying. After spraying, the surface is dried to a non-stick hand as standard, then the protective layer is removed, Do not open the wiper within 7 days.

• < Prev
• Next >