Tungsten Carbide Acicular Drill

Tungsten carbide acicular drill, which is specially designed for a new drilling method - small-diameter drilling method, is suitable for use in medium-hard rock formations of 6-8 grades. Such an acicular drill bit has higher drilling efficiency, better quality, lower cost and less material consumption than ordinary alloy drill bits and steel drill bits.

More details, please visit:
http://www.tungsten-carbide.com.cn/tungsten-carbide-drill.html

Advantages of Tungsten Carbide Acicular Drill

Tungsten carbide acicular drill has the advantages as shown below as:

1.0 High drilling efficiency. There are many free surfaces, which are conducive to breaking the rock. Drilling in rock formations of 6-7 grades, the efficiency of such an acicular drill is about 1 times higher than that of ordinary tungsten carbide drill bit.

2.0 Long service life, 3 to 5 times longer than ordinary tungsten carbide drill bits.

3.0 Good drilling quality, uniform aperture, small drill bending.

4.0 Less consumable. The cost of abrasive per meter is reduced by 60%, compared with ordinary tungsten carbide drills.

5.0 Low manufacturing cost. One drill can be reused 2 to 3 times.

6.0 Convenient to operate. The hole is clean, and the safety is high.

7.0 Cooperate with the diamond drill to expand the application of carbide drilling.

• < Prev
• Next >