Tungsten for X-ray Machine
- Details
- Category: Tungsten Information
- Published on Tuesday, 14 July 2015 17:00
- Written by wenjing
- Hits: 489
The heart of an X-ray machine is an electrode pair -- a cathode and an anode -- that sits inside a glass vacuum tube. The cathode is a heated filament, like you might find in an older fluorescent lamp. The machine passes current through the filament, heating it up. The heat sputters electrons off of the filament surface. The positively-charged anode, a flat disc made of tungsten, draws the electrons across the tube.
The voltage difference between the cathode and anode is extremely high, so the electrons fly through the tube with a great deal of force. When a speeding electron collides with a tungsten atom, it knocks loose an electron in one of the atom's lower orbital. An electron in a higher orbital immediately falls to the lower energy level, releasing its extra energy in the form of a photon. It's a big drop, so the photon has a high energy level -- it is an X-ray photon.
Due to tungsten alloy has high density, excellent radiation attenuation properties, and environmental friendly, it is also can be used to produce into tungsten case as the radiation shielding to protect medical staffs from the damage of radiation.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online- http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
The Structure of Collimation Assembly
- Details
- Category: Tungsten Information
- Published on Tuesday, 14 July 2015 16:57
- Written by wenjing
- Hits: 382
A radiation apparatus including a radiation source and a collimation assembly is provided. The collimation assembly may include a tungsten multileaf collimator, a motion assembly, and other fixed and movable beam limiting devices. Tungsten multileaf collimator includes a support body and a plurality of pairs of tungsten beam blocking leaves supported by the support body in one or more planes, and the leaves of each pair are longitudinally movable relative each other. The motion assembly includes an actuator and a guide assembly operable to move the support body thereby allowing the one or more planes of tungsten beam blocking leaves to rotate about the radiation source.
In a radiation method, the shape and motion of a tungsten target in a subject is determined. A radiation beam is provided from a source to tungsten target. A treatment field substantially conforming to the shape of tungsten target is defined using a tungsten multileaf collimator assembly comprising a support body and a plurality of tungsten beam blocking leaves supported by the support body. The defined treatment field is moved by moving the support body with the motion of the target.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online- http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
The Overhaul of Tungsten Contacts Ablation in Distributor - IV
- Details
- Category: Tungsten Information
- Published on Tuesday, 14 July 2015 16:48
- Written by Yahong
- Hits: 407
6. The overhaul of capacitor capacity
First, put the capacitor flatly on the cylinder head, and make the housing grounding, then, the high voltage bus is aligned with capacitor wire head about 5mm, then struck tungsten contacts of distributor, so that high-voltage current charged in the capacitor 4-5times. At this time move the capacitor wire head into the housing of about 3mm, if the following phenomenon appears, then the capacity of the capacitor is small and should be replaced. Phenomenon: Flash over, but the spark is weak and sound is small, sparks are dark red; if the following phenomenon appears, then the capacity of the capacitor is large, you don’t need to replacement it. Phenomena: flashover and the sound are louder, with blue sparks.
7. The overhaul of battery wire connection
Remove the oxide of each wire connector and tighten the wires.
8. The overhaul of generator
You can appropriately increase the contact gap of tungsten contacts to avoid the engine is rotating in low speed for a long time.
Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Tungsten Multileaf Collimator in Collimation Assembly
- Details
- Category: Tungsten Information
- Published on Tuesday, 14 July 2015 16:55
- Written by wenjing
- Hits: 378
A collimation assembly including a tungsten multileaf collimator and a motion assembly is provided. Due to tungsten alloy has high density, excellent radiation attenuation properties, and environmental friendly, it is widely used to produce tungsten multileaf collimator in a collimator assembly. Tungsten multileaf collimator comprises a support body and a plurality of pairs of tungsten beam blocking leaves supported by the support body.
Tungsten leaves of each pair being longitudinally movable in a first direction; and the motion assembly comprises an actuator and a guide assembly operable to move the support body thereby allowing the plurality of pairs of tungsten beam blocking leaves to move in a second direction generally transverse to the first direction and the beam axis.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online- http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
The Overhaul of Tungsten Contacts Ablation in Distributor - III
- Details
- Category: Tungsten Information
- Published on Tuesday, 14 July 2015 16:46
- Written by Yahong
- Hits: 337
4. The overhaul of tungsten contacts ablation on tungsten contact spring arm in distributor
If there is no spring balance, you can check tungsten contacts gap firstly. If the gap is greater than the 0.37mm, that is normal, then the tungsten contacts are closed, and then hand struck tungsten contacts to test fire, if there is a strong high voltage spark, then the tungsten contact spring arm is too soft.
If you have a spring balance, then: You can use spring balance to hook one end of the active tungsten contact arm, when the contact is opened, if the reading on the spring balance does not meet the spring force standard of tungsten contact of the car model, you should replace it, On the other hand, you do not need to replace it.
5. The overhaul of capacitor ground
You must fasten the capacitor case and tighten the wire point in order.
Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn