Dart throw should grip and stance just follow the requirements . You will benefit more when you know the connections.There is only one proper stance that fulfills the requirements for throwing: The right foot (left foot for left handers) forward stance.

First , We get this when we look at the aiming position. When we aim we put the target, the dart and the eye in one line. When we throw we should try to put the 3-lever system of the arm in a 2-dimensional plain. This reduces the margin of error by eliminating sideway movements of the arm. Thus it's easy to work out that we won't get happy with a frontal stance whith both feet touching the throwing line. Maybe this would be more comfortable, but we can't use it.

Second,in an optimum stance the soulders and the board form a 90 degrees angle, and so does the line from the forward foot to the behind foot. But most people find this highly uncomfortable or even impossible. So Dart throw just follow the requirements and find a compromise

Then,the shoulder angle:It defines the stance. You should try to get close to the perfect 90 degrees, but not with an absolute sacrifice of throwing comfort. Proper angles start from approx. 50 to 80 degrees. The exact value here is your personal compromise.

Finally,the feet angle:The feet angle simply follows the shoulder angle, otherwise you will fall on the floor.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

In every point of the throw dart you must stay perfectly balanced. This will be tricky for beginners and force them to start at a lower angle without leaning forward much.

Weight distribution:Your weight will mainly rest on your forward foot (stance foot), while your behind foot (balance foot) will, well, just hold enough weight to perfectly balance your stance. Remember, no matter which weight distribution you use, your stance must be rock-solid. Don't jump with your forward foot, it must always stay flat on the floor.

Leaning forward:The more you lean forward the nearer you will get to the board (think that's why we do it, huh?), but the more physically demanding and unstable your throw will be. If you lean forward too much you will soon find yourself with serious back problems, especially when you combine it with sharp hip-bend. To keep yourself healthy use leaning forward wisely. Most pros have found a good compromize on this, and so should you. For advice just ask Bob Anderson about his back surgery.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

In every point of the throw dart you must stay perfectly balanced. This will be tricky for beginners and force them to start at a lower angle without leaning forward much.

Leg:Your balance leg is responsible for this work. Lifting it during the throw is not recommended, although it does by some pros, but these players have such a perfect balance they will still beat you with only one foot on the ground. Again, don't 'jump' when throwing - 'one foot on the floor' is not only a billiards rule. Highly recommended for darts players, too. Your balance foot shouldn't be flat on the ground (only okay for beginners), just the toes should touch it.

Torso: Your stance must guarantee that your body doesn't move at all when throwing. Remember the fixed shoulder joint of chapter 1. Don't arch your back, keep your spine straight. Your body must be strained, but your arm must stay relaxed.

As a summary, Throw dart you must stay perfectly balanced.stance is the least difficult, but an important matter. Don't start with a frontal stance, this will disturb all other technical necessities, and you will find yourself struggling sooner or later.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Coarse and spherical tungsten powders were prepared by wet hydrogen reduction.Ammonium tungstate solutions with the additives of Li,Na and K alkali metal salts were used as raw materials.The effects of the type and content of the alkali metal salts as well as reduction time on the microstructure,chemical composition,phase composition, and particle size of ammonium paratungstate(APT) and coarse tungsten powders were investigated by scanning electronic microscopy,energy dispersive spectroscopy,X-ray diffraction,and test sieves.It is shown that ideal tungsten powders with good fluidity,sphericity,integrity and even distribution can be obtained by using the ammonium tungstate solution with 3 g·L~(-1) NaCl,KCl and Li_2CO_3 and reducing at 1000℃for 180 min in wet hydrogen atmosphere.The average particle size of the obtained tungsten powders is 67μm,the maximum particle size is 150μm,the biggest loose density is 13.41 g·cm~(-3),and the best powder flowability is 9 s for 50 g tungsten powders.

Tungsten Powder Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-powder.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn