As we all know, there is no doubt that lead is a toxic substance. Among the lead-alternatives, tungsten, steel and brass is common choice

Brass and steel weights are a bit lighter than lead when it comes to destiny. But unlike tin and lead, brass and steel is often used in spinner bodies and blades effective in stained water. The sharp ticking sound created by brass and steel against beads can distract fish's attention from lures. The bad side is that these materials do oxidize. Steel faster than brass, so care does have to be taken to prevent rusting.

 From all the above reason, we can see tungsten is better than steel and brass in fishing.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

More and more often we hear about legislation prohibiting lead in certain waters. There is no doubt that lead is a toxic substance. As our society develops, people are begun to concern their heath instead of only money. With the technology update, here are some great alternatives to lead that work excellently.

Firstly, Tin, has long been a popular lead alternative, especially with fly anglers. It is fairly simple to use for folks due to the comparatively low melting point. The bad side to tin is that it is lighter than lead, so what might be a half-ounce lead weight, will be less than a half ounce with tin. However the good side to this is that if lures are bigger, those made with tin will be lighter and easier to cast and work than would be its lead counterpart. But tin is also found in jig heads.

The use of tungsten is a revolution of fishing. Tungsten, unlike tin, is denser than lead. This allows lure makers to build heavier jigs and weights without making the lure too big.

So from above, we can make an obvious conclusion, tungsten is the better lead-alternative than tin.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

tungsten is tungsten based non-toxic putty . So we can see it is tungsten- based, not lead-based, so that is not only environmental friendly, it sinks faster and more consistently. Tungsten is almost twice as heavy as lead even more over three times as heavy as most other non-toxic materials. A 1/4 ounce tungsten weight will be considerably smaller in size compared to a 1/4 ounce lead weight.

It works exceptionally well in cold water and is environmental friendly. This will let you to have a heavy weight in a small size. The texture of tungsten putty is softer and tackier than most other putties and is reusable. This allows you easier detect the structure under water when fishing. And it allows anglers to adjust weight while they are nymphing. What’s more, you can add or remove small amounts with a quick pinch. The soft property of putty does not snag. If it does, you can pull it off the leader, by this way, your rig can be saved.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten carbide rods is known as tungsten carbide bars or cemented carbide bars. It is a new technology and new materials.

Tungsten carbide rods are made into cutting tools, which used in metal, wood, plastic desired stiffness and wear resistance, corrosion products, and other industries.

The main feature is the rod having a carbide stable mechanical properties, ease of welding, high wear resistance and high impact resistance.

Carbide rods mainly used in drills , end mills , reamers . It can also be used for cutting, stamping and measurement tools.It is used in paper, packaging, printing, non-ferrous metal processing industry.

Carbide rods can be used not only for cutting and drilling tools (such as micrometers, twisted drills, drill vertical mining tool index), can also be used as an input pin, roll wear all kinds of parts and structural materials to use. In addition, it can be widely used in many fields, such as mechanical, chemical, petroleum, metallurgy, electronics, and defense industries.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten carbide cutter's main points are: solid carbide milling cutters, carbide straight shank, carbide saw blade groove cutter, carbide spiral drill cutter, carbide reamers milling machine, carbide end mills and carbide ball nose end mill.

Tungsten carbide milling purposes: Carbide cutter is mainly used for general CNC machining centers , CNN engraving machine. It can also be fitted to an ordinary milling and processing some of the more complex heat treatment of the material, which is not hard on.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Titanium tungsten carbide cobalt is composed of the WC% 26mdash,Tic, WC and bonding metal cobalt,or only of the WC% 26mdash.Tic solid solution is composed of multiphase carbide and cobalt. The cobalt content of 4% to 10% of the alloy containing Tic 5% ~ 30%, balance WC, mainly used for cutting steel.

Titanium tungsten carbide cobalt has a high resistance to crater wear ability, suitable for long cutting tool materials. Cobalt with tungsten carbide cutting steel prone to crater wear, which is mainly due to the tool and chip diffusion reaction occurs at temperatures caused by the cutting.

The grade of "YT" ("hard titanium" pinyin word prefix) and the average content of titanium carbide composition.For example, YT15, represents the average Tic = 15%, the remainder being tungsten carbide and cobalt titanium tungsten carbide cobalt content.





Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy are especially useful in snowy areas to prevent cars from slipping. Tungsten alloy in snowmobile are metal spikes that are attached to the rubber track of a snowmobile to improve traction. These tungsten alloys allow faster acceleration, quicker stopping and better control in turns.

Tungsten alloy offer a dramatic increase in traction on hard-packed trails and ice and reduce the spinning of the track under aggressive acceleration, decrease the likelihood of getting stuck and allow tighter turns and skid-free stops. They allow a snowmobile to climb hills that were previously impossible to climb. Control of the snowmobile is increased and riding is safer. Tungsten alloy offer an opportunity to significantly increase riding enjoyment and performance of snowmobile.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy darts are more popular with long term darts players. Tungsten is a dense metal, and is actually heavier than lead. The higher density makes it possible to make a slimmer dart, which creates less air resistance when throwing, and is also easier to group together in a small space like the doubles and trebles. The desired weight can therefore be achieved, without adding bulk. Categories of tungsten alloy darts Tungsten alloy darts are also referred to as nickel/ tungsten darts. They are denser than brass or nickel/silver darts, which means barrels with a smaller diameter, and therefore the ability to group them tighter on the dart-board. There are also titanium/tungsten darts available, with the tungsten used as a surface finish to give the dart a different feel to improve the grip, and hence the throwing style. There are different categories of tungsten darts:
• 50%-70% tungsten is commonly sold at discount stores. They generally do not specify a percentage of tungsten content, but just say tungsten darts.
• 80% tungsten is popular with new league players.
• 90+% tungsten is high density and will feel better to throw, as the darts will be slimmer for any given weight.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Advantages of a Heavier Tungsten Alloy Dart
Now, the maximum permitted dart by the laws of the game is 50g (grams). That doesn't sound a lot, but when you consider most people throw darts at a weight of around 22/23 grams, it sounds like a real heavy dart! Don't even consider throwing darts this heavy; when I say heavy, I mean somewhere around the 28g mark. You'll struggle to get some darts that are so heavy anyway in the modern game, they're kept in the past with the wooden darts of this world, darts players use tungsten darts in this day and age.

All of the weight is measured from the barrel, the middle part of the dart which is made of the aforementioned tungsten alloy. That's how the throw is affected in the most severe manner with a heavier dart. You might be stronger in your arm when you throw that dart, and that may mean a heavier dart is the one for you. You do tend to get more control with a slightly heavier dart, from experience. As well as this, if you have a heavier dart, then you can afford to throw it with less effort, as the dart will tend to do more of your work. All things to take into consideration!

Advantages of a Lighter Tungsten Alloy Dart
The light dart is the enigma and annoyance of many a dart player. Some people can't fathom a light dart - and by light I mean the 17/18 gram region - because their action isn't favorable towards it. Some people like to throw with a more relaxed style; that could indeed be you, reading this very article. If it is, you'll want to knock your weight up a couple of grams, as the lighter the dart, the more power will have to be put into your throw. There are some that prefer to throw with force and vigor, if so, try out a lighter dart!

Some Honest Advice
Every dart player has different preferences; for instance, you may instantly feel the dart is going higher than where you’re aiming. If that’s the case, you need to switch to a slightly heavier weight of dart, with the opposite applying if you can’t get the dart up to its desired location. There is no direct advice one can take; the only possible solution is to try a variety, and see which works best.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

The barrel forms the main part of a dart. When we are speaking of "buying a (new) dart" we mean getting a new dart barrel. 

Today's standard material is tungsten alloy. Tungsten alloy is a very dense material, so darts with a considerable weight can be made quite slim. The invention of tungsten alloy darts barrel had a big impact on the sport. With the new darts barrel, it was possible to achieve much better grouping than before, and the averages in pro games have improved dramatically. It is not an overstatement when this development is referred to as "the tungsten revolution".

Before the tungsten revolution, darts barrel were mainly made of brass. Brass darts barrel are still used by some players because they are much cheaper than tungsten’s. But brass darts are ancient technology now.

Because of technical difficulties with manufacturing a 100% tungsten dart barrel is not available. All "tungsten" darts barrel you can buy are in fact made of tungsten alloys, with Tungsten alloy being the most common one. When you buy a dart barrel the amount of tungsten in the alloy is given by a percentage number. Tungsten darts are available from 80% to over 90%. The more tungsten the slimmer - and the more expensive - the dart is. If the high-percentage tungsten darts are worth the higher price is an open question. 80% tungsten maybe good enough for almost everyone.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn