φ32x360mm tungsten alloy rod price is 329.00USD/PC on May 31, 2019. The composition of the rod is 97WNIFE with density of about 18.5g/cm3. Tungsten alloys are also called heavy tungsten alloys, which can enhance machinability and permit manufacturer of rods to offer products with higher rigidly, lower vibration, higher damping and reduce thermal expansion properties. Therefore, tungsten alloy rods are widely used in various areas. 

φ8x1000mm tungsten heavy alloy rod price is 90.00USD/PC on May 21, 2019. The composition of the bar is 90WNIFE with density of about 17.0g/cm3. Chinatungsten is a leader of providing tungsten heavy alloy (WHA) hot swaged rod material with enhanced properties. We can adjust swaging and heat-treating conditions to produce WHA rods with specific combinations of strength and ductility.

φ25.4x10mm tungsten alloy bar price is 9.20USD/PC on Apr. 29, 2019. The composition of the bar is 95WNICU with density of about 18.0g/cm3. We can supply alloys ranging from 90% to 97% tungsten and contain nickel, copper and or iron binders for applications where high density and machinability are required. Also, Chinatungsten is capable of supplying raw material or finished parts as well as custom grades to our customer’s specifications.

φ100x100mm tungsten heavy alloy rod price is 985.00USD/PC on Apr. 16, 2019. The composition of the bar is 97WNIFE with density of about 18.5g/cm3. Sintered WHA blanks can be further rolled or swaged to produce rods with ultimate tensile strengths exceeding 1240 MPa and elongations exceeding 5%. We also precision machines WHA parts for use as ballast weights, radiation shields, boring bars, ordnance components, and other components that require high density and good ductility.

φ8x1000mm tungsten alloy bar price is 90.00USD/PC on Apr. 8, 2019. The composition of the bar is 90WNIFE with density of about 17.0g/cm3. Tungsten alloys which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than lead resulting in a higher concentration of mass in a limited area.

φ32x360mm tungsten heavy alloy rod price is 316.00USD/PC on Mar. 28, 2019. The composition of the bar is 97WNIFE with density of about 18.5g/cm3. Tungsten is suitable for aerospace and high temperature uses which include electrical, heating, and welding applications. Hardness and density properties make this metal ideal for making heavy metal alloys such as copper tungsten that are used in armament, heat sinks, and high density applications.

φ25x250mm tungsten alloy rod price is 162.00USD/PC on Mar. 05, 2019. The composition of the bar is 92WNIFE with density of about 17.3g/cm3. Tungsten heavy alloy rod has characters of high density, excellent formability and machinability, outstanding corrosion resistance, high modulus of elasticity, impressive thermal conductivity and low thermal expansion.

φ35x152mm tungsten heavy alloy rod price is 165.00USD/PC on Feb. 21, 2019. The composition of the bar is 90WNIFE with density of about 17g/cm3. Its size conforms to international standard ASTM B777. We offer a growing range of WHA rod diameters that can be cut to size to customer specified thickness, length, surface finish. We also offering precision machining threaded rod and gun-drilled rod. 

φ25.4x10mm tungsten alloy bar price is 9.20USD/PC on Jan. 29, 2019. The composition of the bar is 95WNICU with density of about 18g/cm3. Its size conforms to international standard ASTM B777. Tungsten is economically fabricated by powder metallurgy techniques and combined with different elements such as nickel, copper, and iron to produce a large variety of tungsten alloys that have found wide acceptance in applications such as radiation shielding, medical equipment, boring bars, vibration dampening, sporting goods, as well as counterweights in aircraft and racing cars. 

φ76x41mm tungsten heavy alloy rod price is 178.00USD/PC on Jan. 02, 2019. The composition of the rod is 92.5WNIFE with density of 17.4~17.6g/cc. Its size conforms to international standard ASTM B777. As with all of our materials, our rod begins as metal powder, pressed in to ingots, sintered, and then swaged and drawn down. Our advanced drawing / swaging process enables us to tailor the product to meet specific customer material and performance requirements to ensure optimal performance in your application.