Tungsten alloy penetrators primarily by military tungsten alloy, which is wrapped in a bomb core made of copper or aluminum shell software. Military tungsten alloy penetrators used in high density tungsten alloy, which aims at the piercing process, the nature of warheads can be maintained, and can carry more energy, thus ensuring its penetration.

Military rifle used tungsten alloy penetrators copper shell casing, and is similar to the traditional use of lead bullets. When piercing shell rupture, while the internal elastic core remains its kinetic energy to penetrate armor. Most types of projectile used in the past used a PTFE coated bullets. And people think the difference is, Teflon shell is not the main role is to assist the bullets penetrate deeper, but to enhance the wear resistance of the barrel to protect the barrel. Because people's misunderstanding, which enacted a law in order to restrict the use of bullets, and ultimately make it disappear.

Armor-piercing capability of tungsten alloy penetrators with the use of the barrel. For an example of the most famous former U.S. President Ronald Reagan assassination •. Gunman using a revolver, bullets penetrating weakened, leading to deviate from the heart of bullets hit the lungs, which saved their lives Reagan. Clear military tungsten alloy penetrators performance that many people not only rely on its own has the attributes. It is also closely linked with the barrel. Improved barrel can take advantage of the characteristics of bullets.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy bucking bar which is sometimes called tungsten alloy rivet buck, is used for bucking the rivets.

When you are going to buck rivets, this is just another name for setting them in place. A rivet is essentially a metal pin with a head on one end and a shank that goes through a hole between two pieces of metal. When the head is compressed against a tungsten alloy bucking bar on the shank side, the shank has no where to go and expands outward forming another head. These two heads on either side act as a fastener and hold the piece of metal tightly together.

1.Place the rivet to be bucked into a rivet hole.

2.Push the pneumatic hammer against the head of the rivet, while at the same time placing the tungsten alloy bucking bar(rivet bar) on the shank of the rivet.

3.Find the center of the shank with the tungsten alloy bucking bar(rivet bar). This does not have to be an exact science, but the closer the center can be found while pushing against the shank, the more symmetrical the expansion of the rivet shank will be.

4.Hold the tungsten alloy bucking bar(rivet bar) steady against the shank once the center has been found, then activate the pneumatic hammer to drive the rivet home.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Introduction military tungsten alloy penetrators

When tungsten alloy penetrators rely on military kinetic warhead to penetrate the armor thus destroy targets. Characteristics of tungsten alloy penetrators military is high muzzle velocity, flight distance and accuracy. Mainly used against tanks, armored vehicles, ships, aircraft and other armored targets. Tungsten alloy penetrators penetrating armor-piercing military then detonated. Penetrate body armor, armored vehicles, tanks and other targets. Military tungsten alloy penetrators that can be used on different caliber weapons. Equipped with armor-piercing high explosive warhead was pointed nose shape. Some military small-caliber armor-piercing tungsten alloy is used inert explosives, detonated by the fuze, instead of high explosives.

Military principle tungsten alloy penetrators

Tungsten alloy penetrators its superior military armor-piercing capability known. Due to its high kinetic energy, kinetic energy penetrators can act on a small area within the armor, so to penetrate armor. As the bullet is made of tungsten alloy, the density is much higher than armor. Tungsten alloy penetrators military warhead has a high hardness, mainly used against tanks, armored vehicles, concrete underground bunker. When fired, gas projectile shot at the role of high temperature and pressure. When hit armor, armored surface in a pit, armor piercing from the surface into the goal, shot from the bottom of the armor. At this time, although the warhead has been broken, but because of great inertia, armor warheads still will continue to internal flight. When the impact force reaches a certain value, the fuse is triggered, the explosive warhead is detonated. As the explosive had a huge impact, can effectively kill people and destroy tanks inside the tank.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Bucking bar is a work tool received behind work surfaces to provide a backing member in applying impact fasteners and including intermitted toolhead and handle parts with a low-recoil impact-absorbing spacer provided there between to take shock loads in compression and shear.

Bucking bars are used on the backside of a metal rivet to counter the force of the hammering on the other side. They also can be used to absorb the force of rivet guns, reducing the vibration of bucking.

Bucking bars used to form bucktails on rivets. And come in many different shapes and sizes. They are normally made from an alloy steel similar to tool steel. The particular shape to be used depends upon the location and accessibility of the rivet to be driven.

The size and weight of the bar depend on the size and alloy of the rivet to be driven. Under certain circumstances, and for specific rivet installations, specially designed bucking bars are manufactured locally.

Bucking bars are normally made from tungsten heavy alloy. All edges are deburred and working surfaces are polished for troubles-free use. This helps to prevent marring of formed bucktails. Please notice that never hold a bucking bar in a vise unless the vise jaws are equipped with protective covers to prevent marring of the bucking bar.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn