Blue Sapphire and Blue Sapphire Substrate
- Details
- Category: Tungsten & Sapphire Growth Furnace News
- Published on Wednesday, 20 March 2013 15:44
Blue sapphires are evaluated based upon the purity of their primary hue. Purple, violet, and green are the most common secondary hues found in blue sapphires. Blue sapphires with up to 15% violet or purple are generally said to be of fine quality. Blue sapphires with any amount of green as a secondary hue are not considered to be fine quality. Gray is the normal saturation modifier or mask found in blue sapphires. Gray reduces the saturation or brightness of the hue and therefore, has a distinctly negative effect.
The color of fine blue sapphires may be described as a vivid medium dark violet to purplish blue where the primary blue hue is at least 85% and the secondary hue no more than 15%, without the least admixture of a green secondary hue or a gray mask.
Thin sapphire wafers also are used as an insulating substrate in high-power, high-frequency CMOS integrated circuits. This type of IC is called a silicon on sapphire or "SOS" chip. These are especially useful for high-power radio-frequency (RF) applications such as those found in cellular telephones, police car and fire truck radios, and satellite communication systems. "SOS" allows for the monolithic integration of both digital and analog circuitry all on one IC chip.
The reason for choosing wafers of artificial sapphire, rather than some other substance, for these substrates is that sapphire has a quite low conductivity for electricity, but a much-higher conductivity for heat. Thus, sapphire provides good electrical insulation, while at the same time doing a good job at helping to conduct away the significant heat that is generated in all operating integrated circuits.
Once the single crystal sapphire boules are grown they are cored-sliced into cylindrical pieces. Wafers are then sliced from these cylindrical cores. These wafers of single-crystal sapphire material are also used in the semiconductor industry as a non-conducting substrate for the growth of devices based on gallium nitride (GaN). The use of the sapphire material significantly reduces the cost, because this has about one-seventh the cost of germanium. Gallium nitride on sapphire is commonly used in blue light-emitting diodes (LEDs).
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com