Maintenance of Carbon Sulfur Analyzer

While analyzing for the carbon and sulfur of steel materials, most of users would choose carbon sulfur analyzer. It is the most commonly instruments for analyzing the carbon and sulfur. Carbon sulfur analyzer is also adopted for some reliability tests of industrial products. In addition, the tungsten granule is an indispensable flux for carbon sulfur analyzer. The fluxing effects of tungsten granule can improve the accuracy of measurement results of carbon sulfur analyzer. However, due to long hours of working, carbon sulfur analyzer will accumulate a lot of sediment, which will reduce the stability of the measurement results. Therefore, the users should always check the work state of carbon and sulfur analyzer, and repair analyzer regularly or make maintenance daily.

The followings are some details about the maintenance for carbon sulfur analyzer. 1. Clean dust in electric arc furnace and clean carefully the inside of the furnace body and precipitator every day. If find that there exist a breakage of dust paper, users should exchange it a new one immediately. Remember not to use any paper napkins or other papers. 2. Two electrodes in the measuring cylinder and buret cannot be contact with each other in any cases, otherwise the process of carbon sulfur analyzer would not function properly. 3. The rubber stopper of buret must be open a notch to make sure that the titration solution can be added. 4. The function of silicone oil in the sensor is to prevent the sensor from corroding. 5. Carbon and sulfur analyzer should be placed on a stable and dry place. 6. Remember to close the master valve of oxygen and the power of instrument if you don’t need to use the analyzer any more in a day. If analyzer has time to rest, on the one hand, it can extend the life time of carbon sulfur analyzer. On the other hand, it benefits to save energy and protect the environment. 7. As the most commonly flux, the quality of tungsten flux should be strictly checked in order to avoid some unnecessary problems during the analysis. 8. Clear up the residue of tungsten granule which do not react completely.

• < Prev
• Next >