Tungsten Alloys, which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than lead resulting in a higher concentration of mass in a limited area.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Detecting a high-quality tungsten alloy fake gold bar would be extremely difficult. It would likely require significant and material alterations to the bar being tested and this would negatively affect the marketability if its hallmark veracity were vindicated. Some applications require the tungsten to be fake gold. The main reasons for tungsten fake gold bar are to protect the wire from corrosion or to solder it to other metals.

Besides,tungsten alloy products could also made as tungsten alloy fake gold bar which posses a better electric conductivity, and contribute greatly to the world industry development. Also tungsten fake gold saves the energy and poses no pollution threat to the environment and thus to achieve a sustainable development.ngsten alloy products could also made as tungsten alloy fake gold bar which posses a better electric conductivity, and contribute greatly to the world industry development. Also tungsten fake gold saves the energy and poses no pollution threat to the environment and thus to achieve a sustainable development.




Tungstenufn Maacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Rivets are used in a variety of home repair, hobby, and craft applications to fasten thin materials together permanently. A rivet forms a connection when the shaft end of the rivet is deformed to hold it in place. Some rivets can be set by hand, while others require a rivet gun. While setting rivets by hand is a fairly easy operation, it's necessary to gather the right tools and safety equipment to do the job right.

1.Prepare the materials to be fastened by drilling a hole through all layers using the drill and drill bit or by using a punch, depending on the material. Steel or aluminum will require a drill bit, while fabrics and leathers will require a punch. Choose a drill bit or punch size that is the same diameter as the rivet shaft. Choose a rivet depth that matches the total thickness of the materials to be fastened. If the rivet is too long, it will not compress enough and the materials will be free to move. If the rivet is too short, it will not grasp the materials enough and it could pull out of the assembly.

2. Insert the rivet through the drilled or punched holes so that the shaft passes through all of the layers.

3. Place the assembly down on the rivet setting pad, with the end of the shaft oriented upwards. The tip of the rivet should be centered on the cone of the setting pad, so that the sides of the shaft can flare out when the rivet is struck.

4. While wearing safety glasses, hit the head of the rivet squarely with the hammer. 5. Turn the assembly over and examine the end of the rivet. The edges should have flared out away from the center, and the material should be fully compressed between the end of the rivet and the head. Repeat Step 4 if the rivet is not fully compressed.


Tungstenufn Maacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

If you would like to distinguish gold-plated from real gold, here is a vey easy way: as we know, tungsten gold-plated product is just covered with a thin coat of gold.

You can make some distilled water, take the one you would to test sharpening, and then put it into the distilled water, out of the distilled water for a while.

If it is not gold-plated tungsten material, it will not change color. We think it is better for client to know how to distinguish gold-plated from the real gold first, then it will have a well knowledge about tungsten gold-plated material.






Tungstenufn Maacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Bucking bar is a work tool received behind work surfaces to provide a backing member in applying impact fasteners and including intermitted toolhead and handle parts with a low-recoil impact-absorbing spacer provided there between to take shock loads in compression and shear.

Bucking bars are used on the backside of a metal rivet to counter the force of the hammering on the other side. They also can be used to absorb the force of rivet guns, reducing the vibration of bucking.

Bucking bars used to form bucktails on rivets. And come in many different shapes and sizes. They are normally made from an alloy steel similar to tool steel. The particular shape to be used depends upon the location and accessibility of the rivet to be driven.

The size and weight of the bar depend on the size and alloy of the rivet to be driven. Under certain circumstances, and for specific rivet installations, specially designed bucking bars are manufactured locally.

Bucking bars are normally made from tungsten heavy alloy. All edges are deburred and working surfaces are polished for troubles-free use. This helps to prevent marring of formed bucktails. Please notice that never hold a bucking bar in a vise unless the vise jaws are equipped with protective covers to prevent marring of the bucking bar.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Tungsten (W) element

Tungsten is a metal element. Tungsten is a chemical element symbol W, belonging to the sixth cycle of the periodic table (the second longest period) of Group VIB through tungsten smelting after the silver-white lustrous metal, high melting point, great hardness, low vapor pressure evaporation rate is smaller, chemically stable.

Basic information

Name: Tungsten

Protons / Electrons: 74

Symbol: W

Neutrons: 110

Atomic Number: 74

Category: Transition Metal

Atomic Weight: 183.84 amu

Crystal Structure: Cubic

M.p.: 3410.0 ° C (3683.15 ° K, 6170.0 ° F)

Density @ 293 K: 19.3 g/cm3

Boiling Point: 5660.0 ° C (5933.15 ° K, 10220.0 ° F)

Color: Silver


Tungstenufn Maacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:  sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn