Tungsten Electrodes Price

W-Ni-Cu-Based High-Density Alloy Compacts Prepared by Preparing the Mixture

Details: Category: Tungsten Information; Published on Thursday, 12 September 2013 11:34; Hits: 1974

Milling Mixing Method

Generally the production of high-density tungsten alloy, mixture preparation materials are used mostly dry powder mixing method, namely mechanical mixing. This method is characterized by simple preparation process. Form a V-shaped or cone blenders. Since W, Ni, Cu metal powders of different densities, in order to achieve uniformity of mixture will generally be Ni, Cu, W powder, mixed 8-12h.

Secondary Pyrolysis Reduction Method

To obtain W-Ni-Cu highly uniform mixing of the components, and to mix with a high sintering activity, it developed a named "secondary pyrolysis Reduction" of new technology. The resulting coating has a certain performance W - Ni-Cu sintered mixture of different ingredients than normal milling mixture reduces 100-130 ℃, and the resulting aggregate is more excellent.

Secondary pyrolysis method is to first reduction of nickel nitrate dissolved in distilled water, then W powder and uniformly mixed solution of nickel nitrate, roasted solution and reduction, and the obtained composite powder of nickel tungsten package. Then the composite powder was mixed with copper chloride, drying, reducing, and finally obtain W, Ni, Cu composite powder.

Mechanical Alloying

Mechanical alloying process is the 1970s after the development of a special alloy materials Preparation mature technology. Mechanical alloying metallic raw material powder in proportion to the drum into a ball mill, adding the ball, in order to prevent dirty, the product of the same composition can also be a W alloy ball. Mechanical alloying time to reach the mixed powders reached after 60h alloying and composition distribution, then press forming and sintering processes. The sintering temperature can be considerably lower.

In addition, since the 1990s, foreign research developed yet another new job - RSU reactive spray deposition method, using this method time is short, quick, the production of tungsten alloy powder and mechanically mixed powder compared to greatly improve reactive sintering the alloy microstructure uniformity and mechanical properties of the alloy.

high-density alloy

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Safety Issues with Tungsten Wedding Rings

Details: Category: Tungsten Information; Published on Wednesday, 11 September 2013 15:00; Hits: 1969

Emergency Situations

The tungsten carbide ring cannot be removed in an emergency situation with traditional ring cutters. It can be removed by emergency personnel by using a tool more similar to a vice grip. In emergency situations when the ring must be removed for the purposes of treatment or stopping further injury from occurring, it must be cracked off the wearer’s finger. This would destroy the ring by breaking the ring into pieces and may cause injury to the wearer. The tungsten carbide ring registers between 8 and 9 on the Mohs hardness scale. Because of these factors, it also cannot be resized in a traditional manner.

Skin Reactions

Tungsten carbide rings can cause an allergic reaction on the skin. These rings are made by combining the tungsten with another metal. Most often, the other metal is a nickel or cobalt blend. This hardens the ring and prevents many of the scratches that are common on softer metals. This is important because the cobalt blend can cause allergic reactions when worn for long periods of time. The skin cells and sweat can cause oxidation, and skin and ring discoloration. If you have sensitive skin, you’ll want to make sure that you check the metal blend. Cobalt is a little less expensive, but nickel is entirely hypoallergenic and does not suffer from oxidation.

Injury from Accidents

Tungsten carbide rings can be caught in industrial settings. It is rarely advisable to wear jewelry in warehouse, automotive, construction or manufacturing industries; however, tungsten carbide rings are particularly dangerous. Many pieces of jewelry will bend or break when pressure is put on them from machines or other areas. If the pulling occurs or the ring becomes caught, the ring will not break and may cause further injury to the person involved.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

How Does a Cordless Drill Work?

Details: Category: Tungsten Information; Published on Wednesday, 11 September 2013 14:42; Hits: 2075

Introduction

Cordless drills are versatile, durable tools that can be found on construction sites, in garages and shops everywhere. One of the things that makes cordless drills so popular is that they can be taken almost anywhere. Just make sure that you have a fully charged battery and spare if you plan on working late. Cordless drills have almost (but not completely) replaced the old corded models.

The Power Supply

The most common power pack in a cordless drill--or even most cordless tools for that matter is the nickel cadmium (NiCd) battery. A battery is generally made up of two dissimilar metals (in this case nickel oxide hydroxide and cadmium) in an electrolyte ("battery acid"). In a battery, the chemical reaction between the two metals and the electrolyte cause electrons to flow from one side to the other.

In a cordless drill, the NiCd battery supplies current to a small DC motor which does the work of the drill.

The Work Horse

In any electric motor, there will be an armature (also called a rotor), a commutator, brushes, a permanent magnet and an axle. When direct current is applied to a DC motor, it creates an electromagnetic field in the windings of the armature. The difference in magnetic forces between the armature and the permanent magnet cause the armature to turn. As the armature turns, the commutator acts as a switch that reverses the current in the armature (and the brush connects the commutator to the current). This reversal of current keeps the armature turning.

The armature turns the axle and in a cordless drill the axle turns a transmission. The transmission has several gears that turn the spindle that does the actual drilling action.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Can a Tungsten Ring Be Resized?

Details: Category: Tungsten Information; Published on Wednesday, 11 September 2013 14:57; Hits: 1965

Re-sizing

Tungsten rings cannot be re-sized because of tungsten's physical properties. According to many jewelry sites, tungsten rings are 10 times harder than 18K gold and four times harder than titanium. Tungsten also has a very high melting temperature of 6170.0 degrees Fahrenheit.

Sizing Options

When it comes to tungsten rings, sizing options are limited. However, many jewelry stores offer re-sizing warranties that will cover the ring if one should need it to be sized. In the case of a tungsten ring, the purchaser must ship or return the ring to the store it was purchased and a new ring will be sent to him or her.

Benefits

Tungsten is a very hard metal. It will not bend like gold rings do. It is also difficult to scratch due to its physical properties. Due to the fact it is almost impossible to scratch, it holds its polish as well.

Considerations

Tungsten rings are more brittle than other metals because they are so hard. While the ring will not bend, this could cause the ring to shatter if it were struck.

Tungsten rings are often sold as an alloy with cobalt. Cobalt has properties that, when in contact with oils in skin, could permanently tarnish the ring.

Purchasing

When purchasing a tungsten ring, it is important to remember to buy a ring that is cobalt free as well as one that comes with a warranty (or a separate purchasable warranty) that covers resizing.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Uses of Drill Bits

Details: Category: Tungsten Information; Published on Wednesday, 11 September 2013 14:39; Hits: 2007

The electric drill is one of the most useful common tools in the handyman's arsenal. The wide variety of available drill bits allows an almost endless number of uses. Different bits serve different purposes. Uses for drill bits range from making tiny holes in wood to drilling large ones in cement; you need to match the type of drill bit to its intended purpose.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn