Method of Taifu is actually flotation and gravity concentration at the same time on the same device. It is the floating separation of sulfide ores that is easy on flotation and other ores in the case of coarse-grained, while the different proportion of ores can also be separated in the bed surface. Method of Taifu is suitable for particle size range of -3 + 0.2mm. 

Taifu has the following three features:

1, the equipment is simple and easy to operate, process has strong adaptability, suitable for the various sizes of factories and mines.

2, gravity concentration and flotation combined to get a better separation efficiency, simplify the process and enhance production efficiency .

3, coarse material can be handled (up to 3mm), saving grinding costs, the phenomenon that useful minerals are over crushed when regrinding can be avoided.

 

In wolframite concentrators’ gravity concentration of concentrate, coarse-grained tungsten minerals and sulfide minerals exist, there are two tungsten sulfide ore mineral separation methods, one is the material ground to a particle size flotation required (general sulfide ore flotation size upper limit for -0.3mm) were sulfide ore flotation, but all mineral grinding inevitably produce more of tungsten fine mud, the recovery of tungsten negative; another method is to use a floating station the method in the case of the coarse ore and tungsten sulfide minerals separated, so you can avoid the mud of coarse-grained tungsten minerals. Taifu in the Selection segment wolframite processing plant is coarse hook minerals and sulfide mineral commonly used method of separating, in dealing with coarse-grained disseminated sulfides cassiterite tin processing plant also has applications such as Dachang car River processing plant is the use of lift float to separate coarse cassiterite and sulfide ore, as well as selected plant with lift float separation scheelite, fluorite and apatite.