Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. The warhead of MAPATS adopted tungsten alloy swaging rod.

MAPATS is a laser-beam riding anti-tank guided missile developed by Israel Military Industries as a possible successor to US wire-guided BGM-71 TOW.

MAPATS is capable of day and night operation, while the gunner has to direct his laser designator on the target until the missile impacts. First revealed in 1984, it has no trailing wire; so it can be fired over water at naval targets or from sea to land, unlike wire-guided ATGMs. The launcher has an elevation capacity up to +30°, so MAPATS can be used in the anti-helicopter role. Externally, MAPATS is very similar in appearance to the TOW 2.

With tungsten alloy swaging rod, LAHAT can penetrate armor easily to destroy armor vehicles or tanks.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

While pure gold is forever, gold plating often fades with the passage of time. Thankfully, items that are gold plated can often be repaired and restored to their former glory. While you may not always be able to restore them to look as good as new, you will be able to make the gold plated items look much better than they did before restoration.

1.Clean the item. Prepare the surface and remove all contaminants that could cause problems later. Use a gentle hand soap and a tooth brush to remove any dirt and grime. Pat dry using a paper towel, then let the item air dray completely to make sure that the surfaces, including any crevices, are free of moisture.

2.Buff the surface with a jeweler's cloth. Sometimes, this is all that is needed to restore a uniform luster to the surface and to dull down the high points where the underlying metal shows through the gold finish. Jeweler's cloths are often made to wipe tarnish off of silver, but they are also effective on gold plated items.

3.Use a gold plating kit. If cleaning and buffing did not provide a satisfactory result, there are kits available that are aimed at helping people restore gold plated items.

For immersion gold plating kits, put the item that needs plating repair in a small basket, which comes in the kit. Place the basket on an activator disc. Next, you place the basket and activator disc into a pre-heated gold solution (which comes in the kit as well).

After several seconds, rinse the object in water, then buff it with a polishing cloth. It creates a gold bond in seconds, which serves as an easy fix.

Gold plated Tungsten Product Manufacturer & Supplier: Chinatungsten Online - http://paper-weight.cn/
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Gold plating is a thin layer of gold plated on the surface of another metal. Gold plating offers an expensive-looking finish that is lustrous but also low cost. A few items made with gold plating are musical instruments and jewelry. Gold plating is resistant to tarnishing, but it is also fragile because the layer of gold is so thin. Polishing gold plating requires a gentle hand.

1.Dampen a clean cotton cloth with water.

2.Wipe the gold plating with the cloth to remove the dirt and oils from the surface. After cleaning the gold plating, the item may have a more lustrous appearance because the dirt dulled the sheen. In many cases, simply wiping is enough to get the metal to shine again.

3.Polish the gold plating with a polishing cloth made for gold. Gently rub the gold plating to restore the shine. Too much pressure will remove the thin layer of gold.

Gold plated Tungsten Product Manufacturer & Supplier: Chinatungsten Online - http://paper-weight.cn/
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. The warhead of LAHAT adopted tungsten alloy swaging rod.

The LAHAT (Laser Homing Attack or Laser Homing Anti-Tank, also a Hebrew word for incandescence) is a third generation semi-active laser homing low-weight anti-tank guided missile developed since 1992 and manufactured by Israel Aerospace Industries. It was designed primarily to be fired by Merkava tanks' 105 mm and 120 mm tank guns, though it matches all types of 105 mm and 120 mm guns, including low recoil guns and low-weight guns of military armoured cars. It is also suitable for patrol ships, possibly modified for 105–106 mm recoilless rifles, UAVs, HMMWVs, and SPAAGs. Unlike other tank rounds, LAHAT does not need a tank gun for operation.

By using tungsten alloy swaging rod, LAHAT can penetrate armor easily to destroy armor vehicles or tanks.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Many necklaces, rings and other items appear to be made of solid gold, but these items may only be gold plated. Discoloration, density and magnetism all provide clues that an item could be plated.

Skin Discoloration
Skin discoloration occurs when friction builds between the skin and the jewelry item. Real gold should not cause this discoloration, but gold plating covering a base metal, such as copper or nickel, sometimes wears through, and the other, less expensive base metal could cause skin discoloration.

Item Discoloration
The gold plated item itself sometimes discolors. If the gold depositing is laid too thinly over the base metal, the plating becomes porous, allowing the base metal to migrate through the pores and create a discoloring compound on the plating's surface.

Density
Gold density averages about 19.3 grams/mL. If the density of the piece in question varies too greatly from this measurement, the gold may only be plating. Weigh the piece in question against a known gold piece, or measure the displacement of water when the piece is submerged.

Magnetism
Gold does not attract magnets. If the piece in question proves to be magnetic, gold plating might be covering a magnetic base metal.

Gold plated Tungsten Product Manufacturer & Supplier: Chinatungsten Online - http://paper-weight.cn/
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. The warhead of FGM-172 SRAW adopted tungsten alloy swaging rod.

The FGM-172 SRAW (Short-Range Assault Weapon), also known as the Predator SRAW, is a lightweight, close range missile system produced by Lockheed Martin, developed by Lockheed Martin and Israel Military Industries. It is designed to complement the Javelin anti-tank missile. The Predator has a longer range and is more powerful than the AT4 that it is designed to replace, but has a shorter range than the Javelin.

By using tungsten alloy swaging rod, FGM-172 SRAW can penetrate armor easily to destroy armor vehicles or tanks.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Military tungsten alloy swaging rod is made of tungsten alloy alloy. Afrter being swaged, the ultimate tensile strength of tungsten alloy rod is increased. The tensile strength of military tungsten alloy swaging rod
can reach 1200MPa, or even 1400MPa. Military tungsten alloy swaging rod is widely used for AGM-169.

The AGM-169 Joint Common Missile (JCM) was a tactical air-to-surface missile developed by the Lockheed Martin corporation from the United States.

The missile was designed to replace the AGM-114 Hellfire and AGM-65 Maverick. Its seeker head used a combination of semi-active laser, millimeter wave, and IR guidance similar to that found on the FGM-148 Javelin anti-tank missile. This allows the missile to have a greater fire and forget capability and to operate off all current air platforms. The missile has longer range, a more potent warhead, and a "safing" system, allowing naval aircraft to return to ship without jettisoning the munitions.

Military tungsten alloy swaging rod is made of tungsten alloy alloy. Afrter being swaged, the ultimate tensile strength of tungsten alloy rod is increased. The tensile strength of military tungsten alloy swaging rod
can reach 1200MPa, or even 1400MPa. Military tungsten alloy swaging rod is widely used for AGM-124 Wasp.

The AGM-124 Wasp is a missile developed by the United States of America. The Wasp grew out of the 1975 WAAM (Wide-Area Anti-Armour Munitions) program initiated by the US Air Force in order to develop a series of new air-to-ground anti-armour weapons for close-support aircraft. The three-pronged program led to the CBU-92/B ERAM (Extended Range Anti-Armour Munition), the CBU-90/B ACM (Anti-Armour Cluster Munition), and the Wasp anti-armour missile. The Wasp is regarded as the most advanced of these weapons.

With high tensile strength and high hardness of military tungsten alloy swaging rod, AGM-124 Wasp can penetrate armor by using kinetic energy and destroy armor vehicles.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn



 

Military tungsten alloy swaging rod is made of tungsten alloy alloy. Afrter being swaged, the ultimate tensile strength of tungsten alloy rod is increased. The tensile strength of military tungsten alloy swaging rod
can reach 1200MPa, or even 1400MPa. Military tungsten alloy swaging rod is widely used for MGM-166 LOSAT.

The MGM-166 LOSAT (Line-of-Sight Anti-Tank) was a U.S. surface-to-surface missile system designed by Lockheed Martin (originally Vought) to defeat tanks and other individual targets. Instead of using a High Explosive Anti-Tank warhead like other anti-tank missiles, the LOSAT employed a tungsten alloy kinetic energy penetrator to punch through armor. The LOSAT is fairly light; it was designed to be mounted onto a Humvee while allowing the vehicle to remain air-portable. LOSAT eventually emerged on an extended-length heavy-duty Humvee with a hard-top containing four KEMs used by special operations.

With high tensile strength and high hardness of military tungsten alloy swaging rod, MGM-166 LOSAT can penetrate armor by using kinetic energy and destroy armor vehicles.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Military tungsten alloy swaging rod is made of tungsten alloy alloy. Afrter being swaged, the ultimate tensile strength of tungsten alloy rod is increased. The tensile strength of military tungsten alloy swaging rod
can reach 1200MPa, or even 1400MPa. Military tungsten alloy swaging rod is widely used for kinetic energy penetrator.

A kinetic energy penetrator (also known as a KE weapon) is a type of ammunition which, like a bullet, does not contain explosives and uses kinetic energy to penetrate the target. The term can apply to any type of armour-piercing shot but typically refers to a modern type of armour piercing weapon, the armour-piercing fin-stabilized discarding-sabot (APFSDS), a type of long-rod penetrator (LRP), and not to small arms bullets.

The principle of the kinetic energy penetrator is that it uses its kinetic energy, which is a function of mass and velocity, to force its way through armour. If the armor is defeated, the heat and spalling (particle spray) generated by the penetrator going through the armor, and the pressure wave that would develop, would destroy the target.

With high tensile strength and high hardness of military tungsten alloy swaging rod, kinetic energy penetrator can penetrate armor by using kinetic energy and destroy armor vehicles.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn