Once the tungsten ore that was extracted from the earth is ready for processing and has been prepared. The process in preparing the tungsten is the same as has been used since it was initially extracted by the Spanish brothers and chemists Juan Jose and Fausto d’Elhuyar y de Suvisa. However, unlike the method used by the d’Elhuvar y de Suvisa brothers, modern extraction and preparation requires an extra, complicated step. Today, a complex chemical extraction is produced during the process. The chemical is called ammonium paratungstate, or more commonly known as APT.

APT is produced in two different ways. The methods are acid leaching and autoclave-soda. Ore is mixed with sodium carbonate under high temperatures and pressure in the autoclave-soda process. APT crystals are formed after ammonia is added to sodium tungstate solution.

In the acid leaching process, tungsten ore is broken down using hydrochloric acid making solid tungstic acid and calcium chloride. Ammonia is used as in the autoclave-soda process. Ammonia is used to dissolve tungstic acid. After evaporating and filtering the mixture, crystals of APT are produced.

Now, you may be wondering what crystals have to do with the tungsten carbide rings you purchased at your local or online retailer. Well, the process is still yet to be completed. The next part of the process is to make tungsten oxide.



Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com




 

Tungsten alloy is used for shielding against X-ray in medical. With the development of radiation shielding for X-ray equipment, especially constantly carrying out radiation shielding and safety regulation or standard, awareness of radiation shielding is strengthened in generally. Now accidents caused by X-ray are few. However, in the past, if did not notice intermittent exposure to control irradiation of X-ray, it may cause radiation injury to the skin of patient and medical staffs’ hands when utilizing fluoroscopic viewing to carry out fracture reduction and searching foreign matter inside body. At the beginning of 1980’s, one hospital in China used 10mA portable X-ray equipment which had low effectiveness of shielding to search the bullet in buttock of a child who shot by air pistol. Medical staffs were lack of knowledge about radiation shielding and time of fluoroscopic viewing was too long. That caused II~III degree acute radiation burning accident to part skin of child. The child accepted symptomatic treatment in hospital for several moths and also needed skin grafting after half a year. It also happened that medical staffs could not control fluoroscopic viewing time, resulting in over irradiation of X-ray to medical staffs’ hands and radiation injury when carrying out fracture reduction and searching foreign matter inside body.

Traditionally, lead was used as raw material for radiation shielding. However, lead had toxicity which may cause pollution. The density of tungsten alloy is higher than lead by 60%. High density of tungsten alloy allows a reduction in physical sizes of shielding components without compromising effectiveness of shielding characteristic. Otherwise, tungsten alloy has the advantage of non-toxicity. Tungsten alloy is suitable for radiation shielding.



Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 

Tungsten is a very unique metal with very unique characteristics. Tungsten is a very heavy metal. In fact, tungsten derives its name from the Swedish words tung and sten, which means “heavy stone”. In terms of weight compared to lead, a cubic inch of lead weighs half as much as a cubic inch of tungsten. Just to put in as a perspective, a cubic inch of lead weighs about six and a half ounces (a little less than half a pound).

Much has been said about tungsten’s toughness and high durability, but it is also pretty brittle. In fact, it is possible to cut a piece of with a hacksaw. Some tungsten wedding bands have been known to break if dropped from a fairly high distance. Nonetheless, tungsten carbide is still one of the toughest and strongest of all metals known to man.

One of tungsten’s most amazing characteristics comes from its ability to withstand heat. With the exception of carbon, tungsten has the highest melting point of all elements. Tungsten has a melting point (the point where it changes from a solid to a liquid) of 6,152 degrees Fahrenheit (3,410 degrees Celsius). At 4,982 degrees Fahrenheit, another “tough” metal – Iron – is already boiling. At high temperatures, tungsten keeps its profound strength and does not begin to expand nearly as much as other metals. Because of its ability to remain strong under high temperatures, tungsten is used in space travel.

Another interesting characteristic of tungsten is that it does not react with many other substances including acids. Tungsten is resistant to most acids, which also aids in the jewelry industry. The lack of reaction with acids and other elements prevents your finger from turning green.



Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com





 

Tungsten alloy collimator is widely used for radiotherapy. In China, radiotherapy was begun in 1930’s. Radium Hospital (Fudan University Shanghai Cancer Center), build in 1931 and Peking Union Medical College Hospital (having 200mg radium needle, a 200kV X-ray therapy apparatus and a 120kV X-ray therapy apparatus), build in 1932, were the first hospitals launching the earliest radiotherapy in China. At the end of 1950’s, China imported the first ⁶⁰Co therapy apparatus, high energy ray device. China imported the first betatron in 1968 and the first liner accelerator in 1975. In recent years, radiotherapy has developed unprecedentedly. All of new radiotherapy techniques are developed including three-dimensional stereotactic radiotherapy (gamma knife, X-ray knife, conformal therapy and intensity modulated radiotherapy). Researches on tumor radio physics and radio biology also achieve fruitful results. In recent years, hospitals adding radiotherapy in every province, city, prefecture-level city, county-level city even small towns are more and more. Radiotherapy equipments are more and more advanced.

Tungsten alloy collimator is used for guiding X-ray to protect patients and doctors from radiation. Density of tungsten alloy is higher than lead by 60%. The high density allows a reduction in physical sizes of collimator without compromising effectiveness of shielding characteristics. Otherwise, tungsten alloy has the advantage of non-toxicity. So tungsten alloy is more suitable for collimator, compared with lead.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com

 

The high proportion of raw materials for production to clean the metal tungsten alloy counterweight block is pollution-free, in line with international environmental standards, proportion (> 18g/cm3), small size. Therefore, resistance to strong winds, light into the water, sinking fast, and sinker the best alternative to products sold in Europe and other developed countries.

Tungsten alloy counterweight block including: tungsten alloy golf weight, car weight of tungsten alloys, tungsten alloys and fishery pendant with heavy tungsten alloy ship weight, tungsten alloy aircraft weight and so on.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com

 

Metal Injection Molding (MIM) is a growth technology for manufacturing complex-shaped,high-volume metal or alloy parts. Metal Injection Molding (MIM) parts can be produced from ferrous and non-ferrous metals and alloys.

The advantages of Metal Injection Molding (MIM)
Density: Typically 95-98% of wrought material. Mechanical Properties - Comparable to wrought alloys of similar composition. Complexity - Geometries comparable to plastic injection molding. Surface Finish: As processed, 32 ram or better. Corrosion Resistance - Comparable to wrought alloys of similar composition. Alloy Selection - Many ferrous, nickel-based and copper-based alloys available.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com



 

Tungsten fishing weight is an ideal, environment-friendly alternative to lead weight, which are toxic and increasingly being labeled an environmental hazard.

As the high density of tungsten, the tungsten fishing weight makes your fishing easier. It is extremely sensitive and can actually help you "feel" what the bottom is made of and what your bait is bumping into, such as brush, rocks, mud, etc.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com



 

Tungsten alloy fishing weight has many advantages such as high density with small volume, good corrosion resistance, perfect hardness,etc.

High density make tungsten alloy fishing weight smaller than the conventional lead fishing weight. It will be hung up far less with a tungsten sinker than with a lead sinker because of its smaller size.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com

 

Tungsten alloy bar has the good properties of high density with small volume, perfect hardness, non-toxic and environmentally friendly, so it is widely used as counterweight.

Followings are physical properties of tungsten alloy bar:
1, Width×Length: (2.0-100.0mm)×(2.0-100.0mm)
2, High: 50-1000mm
3, Density: 15.8-18.75 g/cm3
4, W content: 85-99%
5, Composition: W-Ni-Fe, W-Ni-Cu



Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com




 

Tungsten alloy fishing weight has so many good properties.

Tungsten alloy fishing weight is small size and large proportion (> 18g/cc). They are against strong wind, light into the water, sinking fast, and are the best alternative to lead sinkers. Compared to lead fishing weight tungsten alloy fishing weight is non-toxic and environmentally friendly, so it is best-selling in Europe, the United States and other developed countries.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten Picture Center: http://picture.chinatungsten.com
Tungsten Video Center: http://v.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com