Carbide Tools Precaution For Use

The precaution for use of carbide tools is listed as follow,

1. Carbide grades. This sounds strange as it was also an advantage, but harder carbides have problems as well. Due to the high hardness of inserts they can be broken or chipped easily if they come into contact with hard materials. You must watch out for loose knots or foreign materials at all times.

2. Proper setup. Inserts must be mounted properly between changes. This includes making sure pitch and dust is removed from all mounting surfaces before putting in a new insert. Seating inserts properly in the head is important to getting the proper cut. Also, proper tightening of gib screws is important to prevent insert breakage or screw stripping.

3. Damage. If an insert head is crashed or an insert is broken, the head may need to be sent back to the manufacturer for repairs. In the worst case scenario, you may have to replace the head due to the damage.

 
Tungsten Carbide Coating Tools: Chinatungsten Online - http://www.tungsten-carbide.com.cn
 Tel.: 86 592 5129696; Fax: 86 592 5129797
 Email:  sales@chinatungsten.com
 Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
 Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

• < Prev
• Next >