Dissolving Materials
Use chemicals to dissolve the materials underneath the gold of circuit boards. CBX and StripFree products work well but do have drawbacks. CBX is a powder that is good to use in areas where not a lot of other metal types are close. It will be used too quickly otherwise, reducing its cost effectiveness. StripFree should be used when an item is stainless steel based, as the solution uses an electric current to separate the gold from the board. It does require access to a car battery to work, however.

Acid Baths
Use an acid bath. While the chemicals above dissolve the materials beneath gold, acid baths are designed to dissolve the gold itself. Aqua Regia is an acid used to submerge the circuit boards. Once the boards are removed from the acid, the remaining brown, murky water will contain dissolved particles of gold. This process uses highly corrosive substances that have been made safer by the inclusion of SubZero as a replacement for nitric acid in traditional Aqua Regia. Protective clothing and precautions should still be taken when using an acid bath process.

Precipitant
Use a precipitant. Added to water, the precipitant will form a solution that will separate the gold from the acid. The separated gold, once the acid has been discarded, will resemble brown mud. At this point, no further chemicals or solutions will be needed to retrieve the gold. Washing the mud in aqua ammonia and tap water will result in a powder. The powder will then need to be melted to return the gold to its pure state.

Gold plated Tungsten Product Manufacturer & Supplier: Chinatungsten Online - http://paper-weight.cn/
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Gold plating is generally found on circuit boards and fingers inside of computers. There are many ways to recover gold plating but one of the quickest and relatively safest ways is to soak your gold plated item in CBX circuit board stripping powder solution.

1.Put on protective eye goggles and waterproof gloves.

2.Pour out the contents of one jar of CBX circuit board stripping powder into a ceramic bowl or container. You can purchase the powder from shorinternational.com.

3.Add 1 gallon of water to the container and mix with a wood spoon.

4.Add your gold-plated material to the bowl and allow to soak for 6 to 8 hours.

5.Remove the gold-plated material from the solution and set aside. Make sure you are wearing waterproof gloves when you do this.

6.Set a coffee filter into another ceramic bowl or container and pour the liquid into the coffee filter. Lift up the filter as the bowl starts to fill up with liquid. The gold can be found in the filter.

Gold plated Tungsten Product Manufacturer & Supplier: Chinatungsten Online - http://paper-weight.cn/
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. Massive ordnance penetrator used tungsten alloy swaging rod as its warhead.

Massive Ordnance Penetrator (MOP)is a U.S. Air Force, precision-guided, 30,000-pound (13,608 kg) "bunker buster" bomb. This is substantially larger than the deepest penetrating bunker busters previously available, the 5,000-pound (2,268 kg) GBU-28 and GBU-37.

With tungsten alloy swaging rod, massive ordnance penetrator can penetrate deeper and destroy underground bunker.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. AS.34 Kormoran used tungsten alloy swaging rod as its warhead.

The AS.34 Kormoran is a German-produced Anti-ship missile. The Kormoran (cormorant) uses an inertial guidance system for the midcourse phase, switching to active radar homing during the terminal attack phase. It carries a 165 kg (363 lb) delay-fused warhead, designed for 90mm of penetration prior to detonation. The maximum range is 23 km (~14 miles).

With tungsten alloy swaging rod, AS.34 Kormoran can penetrate armor of ship more easily and destroy it.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. Anti-ballistic missile used tungsten alloy swaging rod as .

An anti-ballistic missile (ABM) is a missile designed to counter ballistic missiles. Ballistic missiles are used to deliver nuclear, chemical, biological or conventional warheads in a ballistic flight trajectory. The term "anti-ballistic missile" describes any antimissile system designed to counter ballistic missiles. However, the term is used more commonly for systems designed to counter intercontinental ballistic missiles (ICBMs).

With tungsten alloy swaging rod, anti-ballistic missile counter ballistic missile by utilizing kinetic energy.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. The warhead of FGM-148 Javelin adopted tungsten alloy swaging rod.

The FGM-148 Javelin is a United States-made man-portable fire-and-forget anti-tank missile fielded to replace the Dragon antitank missile in US service.

FGM-148 Javelin is a fire-and-forget missile with lock-on before launch and automatic self-guidance. The system takes a top-attack flight profile against armored vehicles (attacking the top armor, which is generally thinner), but can also take a direct-attack mode for use against buildings. This missile also has the ability to engage helicopters in the direct attack mode. It can reach a peak altitude of 150 m (500 ft) in top-attack mode and 60 m in direct-fire mode. It is equipped with an imaging infrared seeker. The tandem warhead is fitted with two shaped charges: a precursor warhead to detonate any explosive reactive armor and a primary warhead to penetrate base armor.

With tungsten alloy swaging rod, FGM-148 Javelin can penetrate armor easily to destroy armor vehicles or tanks.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. The warhead of MBT LAW adopted tungsten alloy swaging rod.

MBT LAW, also known as the NLAW, is a Swedish short-range fire-and-forget anti-tank missile launcher. Designed for use by infantry, the MBT LAW is shoulder fired and disposable, firing just once before being needed to be disposed of. It is currently in use with the militaries of the United Kingdom, Finland, Luxembourg, and Sweden.

The MBT LAW was developed by Saab Bofors Dynamics in the early 2000s, using technology derived from the BILL 2 (warhead and guidance), and AT4 CS (confined space capability) systems. It is a soft-launch system, allowing it to be used by infantry from within an enclosed space. In this system, the rocket is first launched out of launcher using a low powered ignition. After the rocket travels several meters into flight, its main rocket ignition occurs which propels to rocket from there on, to the target.

With tungsten alloy swaging rod, MBT LAW can penetrate armor easily to destroy armor vehicles or tanks.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

2013 World Darts Championship second round of the Hamilton vs Barnett game video.

Tungsten alloy swaging rod consists of W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe. Tungsten alloy swaging rod is made of tungsten alloy rod. After being swaged, the ultimate stensile strength can reach 1200 MPa or even 1400MPa. Tungsten alloy swaging rod is widely used in military industries. The warhead of Spike adopted tungsten alloy swaging rod.

Spike is a fourth generation man-portable fire-and-forget anti-tank guided missile and anti-personnel missile with a tandem-charged HEAT warhead, developed and designed by the Israeli company Rafael Advanced Defense Systems and in service with a number of nations.

With tungsten alloy swaging rod, Nimrod can penetrate armor easily to destroy armor vehicles or tanks.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

2013 World Darts Championship second round G Anderson vs Bowles game video.