Tungsten carbide lo pointed tap is also called for deep threaded through holes and the use of high strength, long life, fast cutting speed, dimensional stability, tooth pattern Explicit (especially fine tooth).

Tungsten carbide lo pointed tap is a tungsten carbide straight flute tap’s deformation, is founded by the German company, Mr. Ernst Reime NORIS invented in 1923. Linear tungsten carbide straight flute tap on one side of the cutting edge of the chute opening, forming an angle, along the feed direction of the chip that is discharged forward. It is suitable for through-hole machining.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten carbide straight flute tap is the most versatile, through-hole or blind hole, non-ferrous metal or black metal can be processed. The price of tungsten carbide straight flute tap is the cheapest.

But the targeted poor of tungsten carbide straight flute tap, what can be done, nothing is done best. Cutting cone section can have 2,4,6 teeth, short taper for blind hole, long cone for through holes. As long as the bottom hole deep enough, you should try to use some of the cutting cone long, so share the load of gear cutting some more, life is also longer.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Since women play differently than men in golf, a new set of golf club for women is necessary. Typically, women golfers tend to have slower club head speeds and, consequently, lower launch angles. The ideal equipment for women needed to offer them distance and the ability to get the ball airborne.

The golf club starts with two utility woods. These two utility woods incorporate tungsten weights in the clubs are to reposition the center of gravity such that they are easier to hit than long irons. The utility clubs should help women get the ball airborne from a wider variety of lies.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten carbide straight flute tap’s basic composition of the material: HSS, cobalt high speed steel, carbide, M2, M35, M42, 9341,4241,4341,9 SiCr, G15 and so on.

Use of tungsten carbide straight flute tap: generally used in lathe, drilling and tapping machine screw machining. Its cutting speed is slower.

In the processing of materials with high hardness, tool wear can lead to material, cutting material in powder form and short depth of tapping blind holes vias have a good effect.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Tungsten carbide spiral groove is a tungsten carbide spiral flute tap capacity, according to the different spin divided into left and right hand. Left-handed tungsten carbide spiral chips tap tapping screw slots down row, suitable for through-hole; handed tungsten carbide spiral flute tap-tapping screw discharge when the chips upward, suitable for blind holes. 　　

Tungsten carbide spiral flute tap has some features: 1. it can be tapped to the lowermost blind hole; 2.cutting will not be left; 3.easy to enter into the bottom; 4. It has good machinability. Tungsten carbide spiral flute tap is the most commonly used, according to the different conditions with different helix angles.

Generally the larger the helix angle, the better the performance of the chip is. It’s suitable for blind hole machining, while through-hole machining is not the best choice.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Frog golf club is green club head really does resemble the silhouette of a frog, with the two tungsten plugs in the rear of the club head looking like eyes.

The frog's head is made from lightweight, machined aluminum. The two heavy tungsten weights lower and deepen the center of gravity, increasing the moment of inertia for added forgiveness. The weights also help create a face-balanced putter.

Balance and forgiveness are the keywords to the head construction, and together they help create a positive roll, end-over-end with a minimum of hopping or skidding, from impact.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

If you're talking about a club created completely of tungsten, it's not a good idea. Tungsten is pretty heavy; if a club head is made entirely of it, it may make it too unwieldy for most golfers. The swing weights would be crazy heavy. To bring it back to a normal weight, it'd have to be smaller, which is also not a good idea.

This is why many companies use it as an insert. Years back, a few companies were experimenting with titanium irons. If they were to be normal weight, they'd have to be huge; keeping them a standard size meant they'd be too light. Enter tungsten: strategically placed in the lower portion of the cavity, it could normalize the head weight while lowering the center of gravity location.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

If you are working in an international enterprise, a broker in stock or manager in a big insurance company, you can use gold-plated tungsten alloy rod or tungsten alloy golden rod engraved with your company's name as souvenirs or present to your VIP customers. It is a very decent present without costing too much, and also could attract more customers for your business.

Tungsten alloy golden rod,gold plated tungsten alloy rod also could be used as a part for handicraft.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

A sinker is a device, usually made of tungsten, which is used to weight the line and bait to keep it on the bottom. We have talked about how to rig live bait for bottom fishing with tungsten bell sinker. Now we talk something about tungsten walking sinker

1. Insert the end of your main line through a walking sinker.

2. Tie the end of the main line to one end of a two-way barrel swivel. Tie the other end of the barrel swivel to one end of your leader.

3. Tie the other end of your 18 inches of leader line to a hook. A minnow can be hooked through the lips, a leech can be hooked under the sucker, or a night crawler can be hooked straight through, one-quarter of an inch from its tip.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Both salt- and fresh-water anglers catch fish using live bait. Many live bait presentations involve targeting bottom-dwelling fish. The problem is keeping your bait on or near the bottom. There are a variety of methods used by anglers, but what they all have in common is that they all employ some form of a sinker. A sinker is a device, usually made of tungsten, which is used to weight the line and bait to keep it on the bottom. We hold tungsten bell sinker for example.
1. Tie a half-ounce bell sinker to the end of your line. If you are fishing in a river with heavy current, you might want to use a heavier sinker.

2. Tie a no-slip, slip knot about one foot up the line from the sinker. This knot is also known as a loop knot because it is nothing more than a loop tied in the line.

3. Pinch the line at the end of the loop to make a point. Insert this point into the eye of the hook you intend to use.

 4. Hook a minnow through its lips. A leech can be hooked just under its sucker. A night crawler should be hooked straight through, about one-quarter inch from the tip of its head.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn