Tungsten carbide boring cutter is a boring cutting tool, generally round handle, there are large workpieces use square shank, the most common situations that bore machining, reaming, copying, etc. There are one or two cutting section devoted to the existing holes for roughing, semi-finishing or finishing tool. Boring tool can be used on boring machines, lathes or milling machines.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

When the tungsten carbide reamer’s diameter size has increased or the error is large, there are the following solutions:

1.Being appropriate to reduce the outer diameter of the reamer according to the circumstances ;

2. Having appropriate adjustments to reduce the amount of feed or allowance;

3.Straightening or bending can not be scrapped reamer;  

4.Choosing a better cooling performance cutting fluid;

5.Adjusting or replacing the spindle bearings.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

When the internal surface of tungsten carbide reamer is rough, it will cause these problems:

1.The hinged blade mouth is not on the same circumference;

2.The tungsten carbide reamer’s cutting part pendulum has poor tolerance, its edge is not sharp and the surface is rough;

3.Due to material relations, it does not apply to pre-zero or negative rake angle angle reamer.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

The tungsten carbide reamer will have problem with diameter size in working, the circumstances are the followings:

1.Tungsten carbide reamer hinged blade’s diameter size design value is too large or has the mouth burr;

2.Cutting speed is too high, feed allowance IS inappropriate or excessive;

3.Tungsten carbide reamer main angle is too large;

4.Tungsten carbide blade hinge on chips adhered mouth tumor;

5.when sharpening the blade opening swing hinge poor tolerance;

6.when installing carbide reamer taper shank surface oil is not clean or cone has bump hurt;

7.shaft bending or spindle bearings is too loose or damaged.

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn