In the development processing, tungsten carbide encountered contradiction between strength and hardness, which is with high hardness but low strength, high strength but low hardness. WC particle size of tungsten carbide is always greater than its original particle size with traditional methods, and usually in a few microns.

However, many countries have encountered difficulties in the study of nano-carbide, the main problems are reflected in two aspects: First, the preparation of nano-WC-Co composite powder activity is very sensitive to temperature, in the high temperature will be immediately grown up. The current research and development trend is to improving the preparation of ultra-fine WC-Co composite powder method and improve the sintering processing. The compactness and uniformity of the tungsten carbide prepared by low pressure isostatic pressing sintering process are well, and the process has the advantages of short production cycle and small process loss.

China's financial services authorities required major executives of the Shanghai-based bitcoin trading platform BTCC on Friday to rectify misbehavior in the trading of the virtual currency - and to raise awareness of risks as the value of bitcoins experienced wild fluctuations.

Mobile emission catalyst helps in emission reduction from automotive and stationary engines from many vehicles such as cars, trucks, commercial vehicles and buses. It reduces emission of various gases such as carbon dioxide (CO2), carbon mono oxide (CO), hydrocarbons (HC), oxide of nitrogen (NOx) and other gases which are produced due to incomplete combustion of fuel. 

In the field of armor piercing, the United States is well ahead of all the countries in the world - including tungsten alloy armor piercing projectiles.

It is reported the world’s highest bridge, named Beipanjiang Bridge, is open to traffic on Dec. 29, 2016. The bridge connects Guizhou and Yunnan, China. It has been the highest bridge all around the world for the bridge is 565meters again the river surface, with total length of 1341.40meters. The heights of east and west bridge piers are 269meters and 247meters. It took four years to finish such a bridge with many difficulties.

As technology advances, the traditional thread turning process can not meet our processing needs as follows:
1. Large weight, large parts can not be installed in the lathe;
2. Blind hole difficult turning machining thread;
3. Shaped workpiece in the lathe difficult to clamp positioning;
4. Processing large-size thread when the efficiency is too low;
5. The processing efficiency of the material is very low and difficult tool life is very short;
6. Lathe strength can not meet the turning requirements;
7. Broken chip, such as bad or difficult chip.

In this context, tungsten carbide indexable thread milling cutter came into being. Its advantages are: thread milling can achieve heavy cutting, high-speed cutting, can be difficult to complete the cutting of materials, with high processing efficiency, high thread quality (can achieve low surface roughness), tool versatility, processing security Can be significantly reduced user cost of the tool, with only one tool can produce the same pitch but different diameter of the thread, and in any thread tolerance within the manufacturing process. Not only reduces the user machine tool share, and processing efficiency increased exponentially. The tool is the processing of stainless steel, cast iron, cast steel, high strength steel and nonferrous metals and other materials, high-precision milling thread cutting tools. The product type covers all standard thread types, can be installed on the standard cutter bar, and available from stock.

At present, China's thread processing generally stagnant in the processing of traditional turning. Tungsten carbide indexable thread milling cutter successfully developed and applied in production, to fill the gaps in domestic thread milling tool zero, breaking the monopoly of foreign enterprises for a long time, so that China's thread processing technology to a new level, This is of great significance to the development of China's manufacturing industry.

The past Christmas Russian President Vladimir Putin sent his warm Christmas and New Year greetings to president-elect Donald Trump while again urged Trump "to take real steps to restore the framework of bilateral cooperation".

Trump then gave a response with highly compliment of Putin’s view: ‘Putin has exactly the right thought, I do hope Russia – U.S. can act like this to save another unnecessary path’.

Tungsten is adecent carbide well utilized as a part of rapid steels and hot framing apparatus steels, maintenance of hardness and high temperature quality of the matrix. It is a steel dark metal that expands temperature and red hardness, improves growth and enhances durability of steels.

The report high speed tungsten steel market research report highlights key dynamics of global high speed tungsten steel sector. The potential of the sector has been investigated along with the key challenges. The current market scenario and future prospects of the sector has also been studied. Additionally, prime strategical activities in the market which includes product developments, mergers and acquisitions, partnerships, etc., are discussed.

The report covers the market projection and analysis of high speed tungsten steel market research report on a global as well as regional level. The report is a composition of first-hand data, quantitative and qualitative valuation by industry analysts, contributions from industry experts along with their latest verbatim and every industry players through the value chain. The experts have further evaluated the overall sales and revenue generation of this market. Further, the report renders comprehensive analysis of root market trends, macro-economic indicators and various governing elements, along with market enhancements according to each segment. Also, the report comprises of various profiles of fundamental market players of Tungsten High Speed Steel market.

With thorough market segment in terms of different countries, this report divides the global market into a few key countries, with sales (consumption), revenue, market share, and growth rate of tungsten high speed steel in these countries over the forecast period.

Furthermore, this market report is segregated with reference to various product types and their respective applications. The product types are conglomerated keeping in focus the production, revenue, price, market share, and growth rate of every single type. Besides, based on their applications, the report focuses on consumption, market share, and growth rate of high speed tungsten steel in each application.

Ultra-low profile tungsten carbide gripper inserts are designed for ultra-low profile 0.14" (3.5mm) clamping with no dovetail workpiece preparation. These patented triangular grippers feature two rows of teeth at different angles with a 5° taper to maximize the pull-down effect, divide the clamping force, absorb vibration, and allow for high stability and secure workholding. Already integrated with the line of vises, the inserts are ideal for upgrading existing vise jaws and more.

With only 3.5mm of clamp surface needed to securely hold the workpiece, tungsten carbide gripper inserts are ideal for 5-axis machining operations. These durable inserts combine a tough-coated cemented carbide with specialized teeth and triangular shapes that penetrate materials including steel, hardened steel/titanium (up to 50HRC to 54HRC) and aluminum.

Tungsten carbide gripper inserts offer advantages over traditional clamping systems including exceptional clamping stability, no need for pre-machining or dovetailing workpieces, vibration dampening and allowing for very secure holding at lower clamping forces. This results in a higher cutting rate and less waste of materials than traditional clamping systems.

China’s tungsten concentrate prices are expected to average higher in 2017 preview thanks to improving demand, although oversupply – such as stocks held in the Fanya Metal Exchange – will continue to weigh on rises. Stock digestion is still the theme of the market for next year. But the range of price moves may be higher than this year as overall the market is in the process of recovery after it reached a historical low in 2015.

China produced 108,596 tonnes of tungsten concentrate in the first ten months of 2016, down 5.35% year-on-year, data from the country’s National Bureau of Statistics showed. 

Chinatungsten Online assessment for 65% content tungsten concentrate reached 72,000-75,000 yuan ($10,438-10,872) per tonne on Wednesday December 14, up by more than 15% in the year and up to 41% higher than its lowest level of 51,000-54,000 yuan per tonne on November 4, 2015. 

"The market price can’t stay below production costs for a long time; it’s not sustainable and is abnormal," a source from a local miner said. 

"Tungsten is an important strategic metal. I think its price is undervalued; the price increase this year is much smaller than those of other commodities," a tungsten products producer said. 

Average tungsten concentrate production costs in China are recognized at around 80,000 yuan per tonne, according to sources. 

Improved demand, consumption will support prices 
Tungsten concentrate market prices are expected to fluctuate between 75,000 and 80,000 yuan per tonne in 2017, higher than this year’s average of 68,000-70,000 yuan, thanks to consumption of low-priced inventory as well as improving demand.

Market participants expect the Chinese government to announce further plans to buy tungsten concentrate next year, after more than 30,500 tonnes of 65% content tungsten concentrate was purchased in 2016. China’s State Reserve Bureau (SRB) issued five tenders to buy tungsten concentrate in 2016, four of which were successful at reported prices of about 75,000-82,500 yuan per tonne. 

"I think price trend in next year will be similar to this year. Now the market-recognized price bottom for concentrate is about 65,000 yuan per tonne and APT(ammonium paratungstate) is around 105,000 yuan per tonne, once prices reach this level, players will enter the market to buy," a major trader said. 

"Due to the weak market last year and this year, most users kept their stocks at low levels. Now with decreased miner production, SRB’s purchases, and the consumption of some existing inventory, the price should rise somewhat next year," an APT smelter said. 

A Jiangxi-based trader echoed these views, saying that the supply of the raw material in overseas markets, such as Russia and Canada, would also support this price projection for 2017. 

In the first three quarters of this year, China’s tungsten products exports to Europe rose by 39.5% year-on-year, by 4.6% year-on-year to Japan and by 12.1% year-on-year to South Korea. Exports dropped 19.7% to the USA, according to data from China customs. 

Conversely, APT stocks owned by the failed Fanya Metal Exchange was described as a time bomb by market players and is one of the main factors that could suppress price rises for years to come. 

"I don’t think prices can increase much next year, because if prices rise too high it may draw Fanya’s 29,651 tonnes of APT stock into the market, as the country is still hoping to find a better way to return money to Fanya investors," a second trader based in Jiangxi said. 

"For now, no one knows [what will happen to] Fanya’s cargo, but it still is a big concern to the market," the smelter source added.