The Vibration of Tungsten Bucking Bar

The  bucking bars made of tungsten resulted in significantly less vibration measured at the bucking bar when compared to the other two bucking bar materials (cold rolled and stainless steel). The >90% tungsten bar resulted in a 34% decrease in the resultant weighted acceleration when compared to using the cold rolled bar, and a 37.5% decrease when compared to using the stainless steel bar. Additionally, the >90% tungsten bar resulted in 2.8% less vibration transmission than the 90% tungsten bar, although this difference was not statistically significant. The magnitude of the weighted resultant acceleration indicates how fast the bucking bar is “bouncing” or moving as the energy is transferred from the rivet gun through the rivet to the bucking bar. Thus, a bucking bar that is accelerating less would be expected to result in lower grip force to control the bucking bar. Thus, when using bucking bars of the same size, the heavier tungsten bars were superior to the traditional steel bucking bars in terms of dampening vibration transmission without the added cost of increased muscle force to control the bars during riveting. This may also result in a positive health effect as the tungsten bucking bars resulted in an increase in the estimated duration for 10% of the exposed population at the measured acceleration levels to show symptoms of finger blanching (ISO 5349) of at least 49% and 64% when compared to the cold rolled and stainless steel bars, respectively.

Tungsten Bucking Bar Manufacturer & Supplier: Chinatungsten Online - http://www.buckingbar.cn
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
PC Version: Tungsten News & Tungsten Prices: http://news.chinatungsten.com
3G Version :Tungsten News & Tungsten Prices : http://3g.chinatungsten.com
WML Version:Tungsten News & Tungsten Prices: http://m.chinatungsten.com

• < Prev
• Next >