Selecting Baits for Tungsten Dropshot Weight-1

Selecting the proper bait for tungsten drop shot weight is easy if you remember that the technique is first and foremost designed to catch inactive and cautious fish. So, if you can use live bait-active minnows, leeches or nightcrawlers—do it. With artificials, use three- to five-inch thin, soft worms and scent-impregnated minnows. And nose hook your baits—natural and artificial alike—so they're free to wiggle. As for the best colours, simply match the hatch.

And some experienced anglers have sum up the three types of baits for tungsten drop shot weights.Just about any small, soft plastic lure will work for tungsten drop shot fishing. These baits work. Period. Haven't found any place they don't.

1. 4" Ringworm. A flat (IE., non-actiontailed) worm. Somewhere in the neighborhood of 2/3 of the bass can catch on the DS rig in the last 2 years have been caught on this worm.

baits


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

How to Tie Tungsten Drop Shot Weight-2

If you get what's called a drop shot sinker, like this one here, it has a little metal clamp thing at the top that will let you wedge your line onto it so you don't have to tie it. It saves a lot of time and hassle. Your leader should be about 15 inches long.

So now that we have the drop shot rigging, let's go ahead and put the plastic bait onto the hook. Take the worm or other drop shot bait and insert the hook point into the bottom of the bait right behind the nose of the bait. Come up through the bait about halfway and then start threading the hook out through the nose of the plastic bait until the barb just barely comes through the nose of the bait. And that's it! That's how you tie a drop shot rig. You'll notice that the worm will come off the main line perpendicular, just like this. That's it, simple stuff.

tungsten-drop-shot-weight


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

How to Tie Tungsten Drop Shot Weight-1

The drop shot rig is one of the most effective finesse tactics that isn't limited to certain conditions or locations. We show you the proper way to tie the drop shot rig along with some sound advice and tips on nose hooking your bait, leader lengths and drop shot weights.

Let's talk about how to tie the drop shot rig. What you're going to need is your fluorocarbon line and your drop shot hook. We're going to tie a standard palomar knot, so take your line and insert it into the eye of the hook once and pull it through quite a bit, about 3 feet through. Now take that line and run it back through the eye to double up the line and pinch it tight just like this. Now tie your palomar knot and be careful not to twist the line when tying it. Lubricate the fluorocarbon line before cinching the knot down.

Now listen up, this is the important part. Take your tag end and come back down through the eye of the hook. This is important because this is what makes the hook ride upright and perpendicular to the main line. Now you should have a real long tag end, and that is what you are going to use to tie the rest of your leader with. Actually, you don't even need to tie the weight onto this leader.

how-to-tie-tungsten-drop-shot-weight


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Tied Tungsten Drop Shot Weights

These fine tied tungsten weights come with a drop shot clip swivel attached. Perfect for drop shotting, dropper looping, and down shotting your baits and lures for largemouth bass, smallmouth bass, spotted bass, or any other species of fish you are after. All tied tungsten drop shot weights come in a Natural Finish, and in the most popular size options. Tied tungsten drop shot weights are excellent for getting a feel of the bottom. Best yet, Chinatungsten tied tungsten drop shot weights cost less than any other commercially made brand.

Tied tungsten drop shot weights are designed with over 90% tungsten to nickel ratio; making them hard, dense, small, and lead free. There are all of the properties that you have come to love about tungsten but at a more affordable price. Tied tungsten drop shot weights are affordable enough for everyone to use.

Tied-tungsten-drop-shot-weights


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Principles of Choosing Tungsten Carbide Turning Tool Rake angle

The intersection angle between the rake face and fundamental plane of tungsten carbide turning tool is called rake angle. It main function is to sharpen the cutting edge of turning tool, reduce cutting deformation, save cutting labor, and facilitate the chip removal. The size of rake angle can affect not only the cutting deformation and cutting force, but also the roughness of workpiece surface and the intensity and service life of cutting tools.

The principles of choosing the rake angle of tungsten carbide turning tool are as follows:
I.    Choosing rake angle according to the workpiece materials. When the workpiece materials are relatively soft, larger rake angle should be adopted; when the materials are relatively hard, smaller rake angle should be adopted; when turning plastic materials, larger rake angle should be adopted; when turning hard brittle materials, smaller rake angle should be adopted.
II.    Choosing rake angle according to the precision requirements of workpieces being processed. When rough turning towards workpieces with hard surface is conducted, smaller rake angle should be adopted; when finish turning is conducted, in order to improve the roughness of workpiece surface, larger rake angle should be adopted.
III.    Choosing rake angle according to the material type of turning tool itself. When the turning tool material has poor intensity and toughness, smaller rake angle should be adopted but not vice versa.

Tungsten Carbide Turning Tool
 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

 

Advantages of Tungsten Carbide Indexable Insert for Turning

Tungsten carbide indexable insert for turning mainly adopts CVD coating technology to improve the bonding strength and reliability of coating. Its abrasion resistance and tipping resistance have been greatly improved compared with previous ones. The advantages of tungsten carbide indexable insert for turning mainly lie in the following aspects:

I.    Improved abrasion resistance
In a practical application, the adhesive strength of tungsten carbide base body and its coating can be improved through thicker layer of close-grained Al2O3 even coating and the abrasion resistance can also be improved. Except that, the resistance property can be strengthened by increasing the proportion of AL in TiAlN coating.

II.    Improved tipping resistance
To do strengthening and toughening towards the tungsten carbide base body surface can prevent tipping and damage of cutting edge.

III.    Reduced bonding phenomenon
During the turning of SCM steel with soft quality and high toughness, the material bonding in cutting edge easily happens, which may cause the stripping of coating and the blade tipping. However, it can be prevented by adopting Ti compound.

IV.   More sharped cutting edge
To prevent coating stripping in the cutting edge of tungsten carbide indexable insert, the cutting edge is generally made into R shape. The blade using in cutting small workpiece and grooves normally has a sharp cutting edge. Therefore, it would be better to keep the PVD coating thickness within 3μm
.Tungsten Carbide Indexable Insert for Turning

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Precautions of Using Tungsten Carbide Turning Tool with Indexable Inserts

When using tungsten carbide turning tool with indexable inserts, operators should pay great attention to problems as follows:

I.    Blade loosening
If blade loosening happens due to the vibration in the turning of tungsten carbide indexable inserts, operators should check whether the blade is clamped tightly or the clamping component is out of shape.

II.    Abnormal noise
If there is squeak during the cutting, the reasons may be that the cutting tool is not clamped tightly; the cutting tool has seriously worn; the toolbar sticks out too far or lacks toughness; the workpiece for fixture lack toughness, and so on.

III.    Spark in tool nose
If there is spark in the tool nose, the reasons may be that the cutting tool has seriously worn out; there is gap or blade tipping in the tool nose or cutting edge; the cutting speed is too high, and so on. Therefore, the cutting edge or blade then should be replaced and the cutting speed also should be adjusted.

IV.    Blade surface stripping
If blade surface stripping happens during cutting, the amount of cutting fluid should be increased for those blade materials using cooling fluid, while for those high-hardness blade materials unsuitable to use cutting fluid, dry cutting should be adopted.

Tungsten Carbide Turning Tool with Indexable Inserts


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn


 

 

 

Tungsten Carbide Indexable Inserts Precision Choosing

The national standard GB/T2076 – 1987 has stipulated twelve grades of precision towards tungsten carbide indexable inserts, which include A, F, C, H, E, G, J, K, L, M, N, u and so on.

G, M, u grades are normally adopted in turning machining, among which, G grade is of the highest precision, and M grade takes the second place, while U grade of the lowest precision. Obviously, during high precision machining, low precision blade can not be used, or it will affect the machining precision and quality of workpieces. Therefore, the precision of tungsten carbide indexable inserts should be chosen according to the precision requirements of the workpieces being processed. Principles below should be followed during the choosing.

I.    Blades of G grade should be adopted during the finish machining and semi-finish machining of non ferrous metal materials and in the finish machining of quenched steel.
II.    Blades of M grade should be adopted during finish, semi-finish, rough, and heavy cut machining except the two cases above.
III.    Blades of u grade can also be adopted in the rough and heavy cut machining.
IV.    The precision of indexable inserts used in automatic production lines should be higher than that in the common machining.
V.    If there are tool setting gauges, it can be not so strict with the blade precision choosing.

Tungsten Carbide Indexable Inserts
 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

 

Tungsten Round Drop Shot Weights

Tungsten round drop shot weights are always in demand on the tournament trail when anglers are faced with ever changing conditions. Each angler knows with dropshotting, extra sensitivity is what it takes to put more fish in the boat. With tungsten round drop shot weights you will feel any and all bottom composition encountered along the way.

Tungsten round drop shot weights feature a swivel line clip for a secure, twist free operation to ensure a proper presentation. All weights have a strong bond between the swivel and weight.

tungsten-round-drop-shot-weight


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Tungsten Carbide Indexable Drill Bit Introduction

Tungsten carbide indexable drill bit, also called short-hole drill or U drill, is a kind of high-efficiency drilling tool. In recent years, it has been widely used in various kinds of numerically-controlled machining tools, machining centers etc. This kind of drill bit has two indexable inserts installed asymmetrically, forming inner edge and outer edge which are responsible for the machining of internal holes and external holes respectively. When the hole diameter is relatively large, more blades can be installed.

Tungsten carbide indexable drill bit is suitable for high-speed cutting and has high machining quality and good chip removal property. It can be classified into six categories according to its blade shapes, chip removal groove shapes, structure, machining characteristics and so on.

I.    Being classified into quadrangle, convex trilateral, rhombus, hexagon drill bit etc. according to blade shapes.
II.    Being classified into straight flute drill bit and spiral flute drill bit according to the chip removal grooves.
III.    Being classified into cylinder shank drill bit and morse taper shank drill bit according to different drill bit shank shapes.
IV.    Being classified into solid, modular and split type drill bit according to the structure.


Tungsten Carbide Indexable Drill Bit


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

 

WeChat

Tungsten Metal

Tungsten Metal Price

Tungsten Alloy

Tungsten Alloy Price

Tungsten Carbide

Tungsten Carbide Price

Tungsten Powder

Tungsten Powder Price

Tungsten Copper

Tungsten Copper Price

Tungsten Oxide

Tungsten Oxide Price