The Overhaul of Tungsten Contacts Ablation in Distributor - III

4. The overhaul of tungsten contacts ablation on tungsten contact spring arm in distributor

If there is no spring balance, you can check tungsten contacts gap firstly. If the gap is greater than the 0.37mm, that is normal, then the tungsten contacts are closed, and then hand struck tungsten contacts to test fire, if there is a strong high voltage spark, then the tungsten contact spring arm is too soft.

If you have a spring balance, then: You can use spring balance to hook one end of the active tungsten contact arm, when the contact is opened, if the reading on the spring balance does not meet the spring force standard of tungsten contact of the car model, you should replace it, On the other hand, you do not need to replace it.

5. The overhaul of capacitor ground

You must fasten the capacitor case and tighten the wire point in order.




Tungsten Metals Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten.com.cn
 Tel.: 86 592 5129696; Fax: 86 592 5129797
 Email: sales@chinatungsten.com
 Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
 Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
 Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

• < Prev
• Next >