Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for JDAM.

JDAM is a guidance kit that converts unguided bombs, or "dumb bombs" into all-weather "smart" munitions. JDAM-equipped bombs are guided by an integrated inertial guidance system coupled to a Global Positioning System (GPS) receiver, giving them a published range of up to 15 nautical miles (28 km). JDAM-equipped bombs range from 500 pounds (227 kg) to 2,000 pounds (907 kg). When installed on a bomb, the JDAM kit is given a GBU (Guided Bomb Unit) nomenclature, superseding the Mark 80 or BLU (Bomb, Live Unit) nomenclature of the bomb to which it is attached.

JDAM contains shaped charge warheads which made by tungsten alloy swaging rod to destroy undergound bunkers.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for CBU-24.

The CBU-24 (Cluster Bomb Unit-24) is an unguided, aircraft delivered anti-personnel and anti-materiel weapon developed by the United States. Because it is an unguided weapon, the CBU-24 can be carried and dropped by any aircraft capable of carrying standard "dumb" or "iron" bombs.

The CBU-24 cluster bomb consists of a SUU-30 dispenser unit containing a payload of 665 tennis ball-sized BLU-26 or BLU-36 fragmentation submunitions, also known as bomblets.[1] Once dropped from the delivery aircraft, the CBU-24 casing breaks open in-flight and releases the individual submunitions, scattering them over a large area.

CBU-24 contains shaped charge warheads which made by tungsten alloy swaging rod to pierce armor and destroy tanks.




Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn




 

Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for BL755.

BL755 is a cluster bomb. Its primary targets are armored vehicles and tanks with secondary soft target (anti personnel) capabilities.

The MW-1 was designed so that different types of submunitions may be loaded into its 112 tubes. The MIFF, MUSA and MUSPA mines are parachute dropped, and upon reaching the ground self-right and arm. The mines are blast-resistant and are reported to have a self-destruct devices giving them a lifespan of less than forty days.

The BL755 looks like a standard 450 kilograms (1,000 lb) general purpose bomb but with a hard "saddle" on the spine for ejector release and crutching pad loads and a distinctive large turbine-like air arming vane on the nose. The four rear fins are squared off in appearance, but on closer inspection can be seen to be hollow and telescopic. A central extruded aluminum skeleton provides seven bays long by seven bays around, each containing 21 submunitions (147 total). The submunitions are ejected by means of a central cartridge and individual inflatable bladders for each bay, operating in a similar manner to a car airbag. Ejection on the original BL755 bomb is triggered by the rotation of the arming vane, driven by the airflow.

BL755 contains shaped charge warheads which made by tungsten alloy swaging rod to pierce armor and destroy tanks.




Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for MW-1.

The MW-1  is a German munitions dispenser similar to the British JP233. It is designed to be carried on the Tornado IDS, although it can be carried on the F-104 Starfighter and the F-4 Phantom.[1] Since the German Government decision to support the ban on cluster ammunition, the MW-1 is currently being phased out.

The MW-1 was designed so that different types of submunitions may be loaded into its 112 tubes. The MIFF, MUSA and MUSPA mines are parachute dropped, and upon reaching the ground self-right and arm. The mines are blast-resistant and are reported to have a self-destruct devices giving them a lifespan of less than forty days.

MW-1 contains shaped charge warheads which made by tungsten alloy swaging rod. With tungsten alloy swaging rod, MW-1 destroys runways efficiently.




Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for JP233.

Originally known as the LAAAS (Low-Altitude Airfield Attack System), the JP233 was a British submunition delivery system consisting of large dispenser pods carrying several hundred submunitions designed to attack runways.

JP233 contains shaped charge warheads which made by tungsten alloy swaging rod to destroy runways. JP233 had good performance in Gulf War.




Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for Durandal.

Named for a mythical medieval French sword, the Durandal is a bomb developed by the French company Matra (now MBDA), designed to destroy airport and airfield runways and exported to a number of countries worldwide. As a simple crater in a runway could be just filled in, the Durandal deliberately utilizes two explosions in order to displace the concrete slabs of a runway, damage that is far harder to repair.

Durandal contain shaped charge warheads which made by tungsten alloy swaging rod to destroy run way.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten alloy swaging rod is made of tungsten rod. The density, hardness and strength of tungsten alloy swaging rod is higher than tungsten alloy rod. Tungsten alloy swaging rod has been widely used for cluster munition.

A cluster munition is a form of air-dropped or ground-launched explosive weapon that releases or ejects smaller submunitions. Commonly, this is a cluster bomb that ejects explosive bomblets that are designed to kill personnel and destroy vehicles. Other cluster munitions are designed to destroy runways or electric power transmission lines, disperse chemical or biological weapons, or to scatter land mines. Some submunition-based weapons can disperse non-munitions, such as leaflets.

Most cluster munitions contain shaped charge warheads which made by tungsten alloy swaging rod to pierce the armor of tanks and armored fighting vehicles.



Tungsten Heavy Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten electrodes are now an essential welding process of welding . The earliest tungsten electrodes are tungsten and tungsten -based synthetic metals thorium tungsten alloy . After a period of use , it was found downstream element thorium radioactive, radiation injury on the human body . So from what people have to study the new tungsten electrodes to replace the use of tungsten electrodes . Soon a number of tungsten electrodes was born. < br />
In the 1980s , the emergence of yttrium tungsten electrode , because too many flaws of this electrode was gradually abandon the use of people .

Continued innovation in the 1990s , Beijing was born lanthanum tungsten electrode , the current from the performance indicators in terms of lanthanum tungsten electrode is the best alternative thorium tungsten electrode products , is now generally recognized.

In addition to the familiar cerium tungsten electrodes there is an intermediate product called zirconium tungsten electrode . Tungsten containing zirconia . Motor performance in the pure tungsten and thorium tungsten electrode. Tungsten in order to avoid the motor itself easily under high load conditions and the development of the melting conditions . Zirconium tungsten electrodes in AC current conditions showed good welding electrode tip can maintain spherical, and the arc is much more stable than pure tungsten electrodes . Zirconium tungsten electrodes biggest feature is that in the case of high load current welding, this electrode structure to reduce spherical tungsten seepage phenomenon and has good corrosion resistance. In general this zirconium tungsten electrodes for aluminum and its alloys will America AC welding .

The use of tungsten electrodes will determine the construction of the entire country , and even said that the earth of the welding industry. Five o'clock in the future will develop into what size , wait and see. Energy-saving , high efficiency which is getting good .


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com;sales@xiamentungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

 

People never stopped research on tungsten electrodes , thoriated tungsten electrodes from the basic to the present cerium tungsten electrode , lanthanum tungsten electrode , and the composite rare earth tungsten electrodes , gradual process and product quality innovation and progress forward . The composite rare earth tungsten electrode is the latest scientific research , our scientists are only carried out vigorously develop . One called ternary complex of tungsten electrode product was born.

Ternary rare earth tungsten electrode is a newly developed green electrode products, with excellent overall welding performance. This is the most promising substitute radioactive contamination of thorium tungsten motors, but because rare earth compound added three constituents , so the production process to bring a new problem , the tungsten electrode swaged and brushed finished products during processing rate decreased significantly. The researchers based swaging process temperature and pass deformation in different designs of the two processes. Plasticity of the electrode integrated use of the various stages of the process of optical metallographic microscopy , scanning electron microscopy and X- ray diffraction analysis and other methods of processing materials were obtained electrode microstructure analysis, we found the two in the formation process fibrous tissue with different characteristics . Good processing performance in which processing technology , fibrotic tissue fibers of uniform width , between the fibers arranged in neat rows . The researchers found that the type of processing parameters of the various stars fibrous tissue , and thus have different yield. Swaging process by adjusting the process parameters to improve the ternary complex of rare earth tungsten electrode production yield.

Ternary complex of rare earth production and application of tungsten electrodes , longevity good economic and social benefits.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com;sales@xiamentungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

 

Binary alloy of silver and tungsten , whether in liquid or in solid, silver and tungsten are immiscible . There AgW30, AgW60, AgW80 and AgW90 so on. Hardness high arc erosion resistance , anti- adhesion and anti- fusion welding ability. Manufactured by powder metallurgy . More than 60% tungsten alloy production of multi-use impregnated . Used for low-voltage power switch, crane switch, locomotive switch , high current switching pre- contact, as well as heavy-duty relays, air circuit breakers. Cobalt can be added to improve the wettability of silver tungsten , reduce the contact resistance .

Silver and tungsten sintered products , higher conductivity than copper tungsten , as mainly suitable for resistance welding electrodes require high antioxidant work environment . As EDM electrodes of the ordinary copper electrode when the finish is difficult to achieve , so that the abrasive to achieve a very high precision.

AGW-70 silver tungsten electrode materials, and mainly used in welding materials ; such as : low-voltage automatic switch, high voltage circuit breakers and protection switch and so on.

Need for silver tungsten electrodes , usually difficult to machine tool processing equipment and high- quality finish electrode, the electrode repair ordinary copper electrode to achieve the best finish , making the mold to achieve very high accuracy.


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: sales@chinatungsten.com;sales@xiamentungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn